Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 4 out of 36 pages
Exam (elaborations)

VIRGINIA HIC EXAM QUESTIONS WITH 100% CORRECT SOLUTIONS| BRAND NEW!!!

Document preview thumbnail
Preview 4 out of 36 pages

What is the purpose of a sash - correct answer glazzing What is the major advantage of icynene over polyurethane foam - correct answer Fast expansion What is the maximum threshold height for R-3 egress door (non sliding) - correct answer 1/2 inches Door casing should be - correct answer Nailed to trimmer stud and then chalked to the wall When installing ceiling drywall, end butt joints should - correct answer Be butted tightly When installing a string of wall cabinets, the cabinets should - correct answer Be attached to the adjacent cabinets before to the wall Which type of hydrated lime should be used for structural masonry wall - correct answer type S Fiber cement siding for exterior weather wall, the minimum thickness should be - correct answer 0.25 For board and batten installation, how should batten be applied - correct answer between joists What is the clearance for an exterior wood siding and finish grade where the wood is untreated - correct answer 8 inches The MINIMUN length drywall screw for installing 1/2 inch gypsum board to wood studs is - correct answer 1 1/4 inches What is the MINIMUM breaking strength required of safety belt lanyards - correct answer 5,400 pounds What is the MINIMUM clearance that combustible insulation MUST other heat-producing devices - correct answer 1 inch What is the MAXIMUM flame spread index for insulation materials - correct answer 25 The amount of water per sack of cement is what controls all EXCEPT - correct answer Wear resistance The escape device for a trench over 4 feet deep MUST be within a MAXIMUM of - correct answer 25 feet of the worker What is the correct sequence for installing a bi-fold door - correct answer Top track, lower track, insert bottom pivot, insert upper pivot What is the MINIMUM height for a stairway handrail - correct answer 34 inches How MUST rafters be framed to each other - correct answer With rectangular ties The nailing holes in aluminum and vinyl siding are elongated to allow for - correct answer Expansion and contraction What are batter boards - correct answer stakes and ledger boards marking building lines The first step that needs to be taken prior to starting any excavation work is - correct answer contracting the local utility companies What is the MAXIMUM distance horizontal reinforcement can be placed from the top of a masonry partition wall - correct answer 16 inches What is the MINIMUM vertical reinforcement spacing for a reinforced concrete foundation wall that is 7 feet high and 10 inches thick on type SP soil - correct answer 48 inches on center A third stairway stringer should be used when the stair width exceeds - correct answer 30 inches Unless otherwise specified, the standard guideline for spacing contraction joints is to space them in feet - correct answer 2 times the stab depth in inches What is the MINIMUM lap of riveted horizontal lap siding - correct answer 1 inches For multiple-width masonry (mampostería de ancho múltiple) what is the MINIMUM thickness of grout between masonry units and reinforcements? - correct answer 1/4 inch What is the MAXIMUM dimension of the ventilation coverings for under-floor space - correct answer 1/4 inch The MOST specific information about the size and location of windows would be found in a - correct answer Floor plan What is the MINIMUM illumination for general constructions area lighting - correct answer 5 foot candles

Content preview

VIRGINIA HIC EXAM QUESTIONS WITH 100%

CORRECT SOLUTIONS| BRAND NEW!!!


What is the purpose of a sash - correct answer✔✔ glazzing



What is the major advantage of icynene over polyurethane foam - correct answer✔✔ Fast expansion



What is the maximum threshold height for R-3 egress door (non sliding) - correct answer✔✔ 1/2 inches



Door casing should be - correct answer✔✔ Nailed to trimmer stud and then chalked to the wall



When installing ceiling drywall, end butt joints should - correct answer✔✔ Be butted tightly



When installing a string of wall cabinets, the cabinets should - correct answer✔✔ Be attached to the

adjacent cabinets before to the wall



Which type of hydrated lime should be used for structural masonry wall - correct answer✔✔ type S



Fiber cement siding for exterior weather wall, the minimum thickness should be - correct answer✔✔ 0.25



For board and batten installation, how should batten be applied - correct answer✔✔ between joists



What is the clearance for an exterior wood siding and finish grade where the wood is untreated - correct

answer✔✔ 8 inches

,The MINIMUN length drywall screw for installing 1/2 inch gypsum board to wood studs is - correct

answer✔✔ 1 1/4 inches



What is the MINIMUM breaking strength required of safety belt lanyards - correct answer✔✔ 5,400

pounds



What is the MINIMUM clearance that combustible insulation MUST other heat-producing devices -

correct answer✔✔ 1 inch



What is the MAXIMUM flame spread index for insulation materials - correct answer✔✔ 25



The amount of water per sack of cement is what controls all EXCEPT - correct answer✔✔ Wear

resistance



The escape device for a trench over 4 feet deep MUST be within a MAXIMUM of - correct answer✔✔

25 feet of the worker



What is the correct sequence for installing a bi-fold door - correct answer✔✔ Top track, lower track,

insert bottom pivot, insert upper pivot



What is the MINIMUM height for a stairway handrail - correct answer✔✔ 34 inches



How MUST rafters be framed to each other - correct answer✔✔ With rectangular ties



The nailing holes in aluminum and vinyl siding are elongated to allow for - correct answer✔✔ Expansion

and contraction

,What are batter boards - correct answer✔✔ stakes and ledger boards marking building lines



The first step that needs to be taken prior to starting any excavation work is - correct answer✔✔

contracting the local utility companies



What is the MAXIMUM distance horizontal reinforcement can be placed from the top of a masonry

partition wall - correct answer✔✔ 16 inches



What is the MINIMUM vertical reinforcement spacing for a reinforced concrete foundation wall that is 7

feet high and 10 inches thick on type SP soil - correct answer✔✔ 48 inches on center



A third stairway stringer should be used when the stair width exceeds - correct answer✔✔ 30 inches



Unless otherwise specified, the standard guideline for spacing contraction joints is to space them in feet -

correct answer✔✔ 2 times the stab depth in inches



What is the MINIMUM lap of riveted horizontal lap siding - correct answer✔✔ 1 inches



For multiple-width masonry (mampostería de ancho múltiple) what is the MINIMUM thickness of grout

between masonry units and reinforcements? - correct answer✔✔ 1/4 inch



What is the MAXIMUM dimension of the ventilation coverings for under-floor space - correct

answer✔✔ 1/4 inch



The MOST specific information about the size and location of windows would be found in a - correct

, answer✔✔ Floor plan



What is the MINIMUM illumination for general constructions area lighting - correct answer✔✔ 5 foot

candles



in drywall 3 trim is used to - correct answer✔✔ provide a finish edge



What is the MINIMUM number of anchor bolts REQUIRED for anchoring a 12 foot section of wood still

plate to a foundation - correct answer✔✔ two bolts



What is the MINIMUM square footage of net clear opening area for an egress window in a second floor

sleeping area - correct answer✔✔ 5.70 square feet



Which window type consists of an upper and a lower sash that slide vertically in the side jambs - correct

answer✔✔ Double hung windows



Damp proofing on below-grade masonry foundation walls shall extend from the top of the footing to -

correct answer✔✔ 6 inches above the finished grade



Scaffolds MUST remain a MINIMUM of how many feet from a 50-kV power line - correct answer✔✔

10 feet



The REQUIREMENT for the thickness of masonry unit bed joints for the second course shall be - correct

answer✔✔ 3/8 inches



What is not REQUIRED in exterior non bearing walls - correct answer✔✔ a singles flat 2" x 4 member

Document information

Uploaded on
February 28, 2025
Number of pages
36
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$12.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Sold
1
Followers
0
Items
347
Last sold
1 year ago


Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions