FIREARMS CLEET
3 factors to how often a shooter should clean gun - ANS -1) Atmospheric Condition
2)Frequency of use
3)Contact with dirt/debris
Service Handgun can be maintained by - ANS -thoroughly cleaning all internal/external parts on
regular basis or after training/qualification sessions
4 components of cartridge - ANS -1) Bullet
2) Powder
3)Case
4)Primer
What to do with duty ammo? - ANS -Check that the rounds fit in the barrel and that there are
none that are defective
Charge Magazine means - ANS -Put bullets in the magazine
Load means - ANS -Put mag in gun
Forcing Cone - ANS -no grooves, cone shaped so it grabs bullet and forces it into barrel
Top Strap - ANS -With two or three fingers through the ___, hand the revolver to the other
person, grip first.
4 steps to unloading revolver - ANS -1)Open Cylinder for inspection
2)Eject cartridges or cases into your hand
3)Visually and digitally inspect each chamber in cylinder
4)Count rounds in your hand to ensure they are accounted for
Revolver maintenance 3 items - ANS -1) Dissassembly
2)Side Plate
3)Top Strap
Side Plate - ANS -Right side of revolver, exposes internal parts when removed
Top Strap - ANS -Upper strap of revolver frame between the hammer and rear of barrel. Used
for transporting by hand
3 factors to how often a shooter should clean gun - ANS -1) Atmospheric Condition
2)Frequency of use
3)Contact with dirt/debris
Service Handgun can be maintained by - ANS -thoroughly cleaning all internal/external parts on
regular basis or after training/qualification sessions
4 components of cartridge - ANS -1) Bullet
2) Powder
3)Case
4)Primer
What to do with duty ammo? - ANS -Check that the rounds fit in the barrel and that there are
none that are defective
Charge Magazine means - ANS -Put bullets in the magazine
Load means - ANS -Put mag in gun
Forcing Cone - ANS -no grooves, cone shaped so it grabs bullet and forces it into barrel
Top Strap - ANS -With two or three fingers through the ___, hand the revolver to the other
person, grip first.
4 steps to unloading revolver - ANS -1)Open Cylinder for inspection
2)Eject cartridges or cases into your hand
3)Visually and digitally inspect each chamber in cylinder
4)Count rounds in your hand to ensure they are accounted for
Revolver maintenance 3 items - ANS -1) Dissassembly
2)Side Plate
3)Top Strap
Side Plate - ANS -Right side of revolver, exposes internal parts when removed
Top Strap - ANS -Upper strap of revolver frame between the hammer and rear of barrel. Used
for transporting by hand
