NETA LEVEL 2 EXAM
1| P a g e
NETA LEVEL 2 EXAM/ ALL QUESTIONS AND
100% CORRECT ANSWERS/ 2025 MOST
RECENT AND VERIFIED EDITION GRADED A+/
BRAND NEW!!!!
Email us at for any
revisions Exams and academics assistance
What is the preferred method of performing primary-injection testing on a low
voltage circuit breaker with ground fault protection?
Use of the manufacturer's test kit or rewiring the neutral CT input is the preferred
method of primary-injection testing on a low voltage circuit breaker with ground
fault protection, otherwise two poles can be connected in series to provide
balanced secondary currents to the trip unit.
At what current level does ventricular fibrillation occur?
-60 to 100mA in AC systems
-300 to 500mA in DC systems
NETA LEVEL 2 EXAM
, NETA LEVEL 2 EXAM
What is the LET-GO current threshold?
For a 70kg body
75mA DC
15mA AC
Meter Sockets and meter disconnect switches should be connected on the load
side of a service disconnecting means.
NETA LEVEL 2 EXAM
, NETA LEVEL 2 EXAM
|Page
FALSE
(NEC Article 230.82)
Which standard addresses equipment grounding?
NFPA 70 (National Electric Code)
A moving iron meter operates by applying current to the coil.
Operating current ( can be AC or DC)
What is the maximum deviation between resistance measurements on bolted
connections?
50% of the lowest value
(MTS 7.20.3.1)
NETA LEVEL 2 EXAM
, NETA LEVEL 2 EXAM
Removable / Drawout circuit breaker Normally 5kV or above
Identify the electrical symbol shown:
NETA LEVEL 2 EXAM
1| P a g e
NETA LEVEL 2 EXAM/ ALL QUESTIONS AND
100% CORRECT ANSWERS/ 2025 MOST
RECENT AND VERIFIED EDITION GRADED A+/
BRAND NEW!!!!
Email us at for any
revisions Exams and academics assistance
What is the preferred method of performing primary-injection testing on a low
voltage circuit breaker with ground fault protection?
Use of the manufacturer's test kit or rewiring the neutral CT input is the preferred
method of primary-injection testing on a low voltage circuit breaker with ground
fault protection, otherwise two poles can be connected in series to provide
balanced secondary currents to the trip unit.
At what current level does ventricular fibrillation occur?
-60 to 100mA in AC systems
-300 to 500mA in DC systems
NETA LEVEL 2 EXAM
, NETA LEVEL 2 EXAM
What is the LET-GO current threshold?
For a 70kg body
75mA DC
15mA AC
Meter Sockets and meter disconnect switches should be connected on the load
side of a service disconnecting means.
NETA LEVEL 2 EXAM
, NETA LEVEL 2 EXAM
|Page
FALSE
(NEC Article 230.82)
Which standard addresses equipment grounding?
NFPA 70 (National Electric Code)
A moving iron meter operates by applying current to the coil.
Operating current ( can be AC or DC)
What is the maximum deviation between resistance measurements on bolted
connections?
50% of the lowest value
(MTS 7.20.3.1)
NETA LEVEL 2 EXAM
, NETA LEVEL 2 EXAM
Removable / Drawout circuit breaker Normally 5kV or above
Identify the electrical symbol shown:
NETA LEVEL 2 EXAM
