Forklift license CORRECT 100%
You need to review OSHA's Forklift standards - ANSWERTrue
The person training you doesn't need knowledge On forklift usage? - ANSWERFalse
Training should feature both - ANSWERWorkplace topics, instructor picked topics,
Truck related topics
Upon completing training you should Be issued a certificate - ANSWERTrue
Select the instance in which you should receive training? - ANSWERPrior to initial
assignment, evaluation indicates need, Different type of equipment introduced,
Workplace condition changes
Four stability Elements of Powered Industrial Truck (PIT) - ANSWERFulcrum Point,
Center of gravity, Stability Circle, Load Center
The Center of Gravity (CG) moves forward and backward as the upright is tilted
forward and back. The CG moves up and down as the upright moves up and down. -
ANSWERTrue
The poit at which weight is balanced on a PIT is called - ANSWERCenter of gravity
The connecting lines between the front wheels and pivot on the center axle is called
the - ANSWERStability Triangle
The steering in a forklift generally controls the _____ wheels? - ANSWERRear
When you remove your foot from the accelerator in most forklifts the truck will begin
to stop through the use of friction. - ANSWERTrue
When an attachment is fitted to a forklift, the dynamic and operating characteristics
may change, making if necessary to de-rate the forklift capacity and restrict some
operating controls. - ANSWERTrue
DAnger sign - ANSWERused to indicate an imminently hazardous situation that, if
not avoided, WILL result in Death
Caution sign - ANSWERused to indicate a potentially hazardous situation, that if not
avoided could result in minor or moderate injury.
Warning sign - ANSWERis used to indicate a potentially hazardous situation, that if
not avoided, could result in death or serious injury.
The distance from the front face of the forks (or the load face of an attachment) to
the center of the load is called the load the center - ANSWERTrue
You need to review OSHA's Forklift standards - ANSWERTrue
The person training you doesn't need knowledge On forklift usage? - ANSWERFalse
Training should feature both - ANSWERWorkplace topics, instructor picked topics,
Truck related topics
Upon completing training you should Be issued a certificate - ANSWERTrue
Select the instance in which you should receive training? - ANSWERPrior to initial
assignment, evaluation indicates need, Different type of equipment introduced,
Workplace condition changes
Four stability Elements of Powered Industrial Truck (PIT) - ANSWERFulcrum Point,
Center of gravity, Stability Circle, Load Center
The Center of Gravity (CG) moves forward and backward as the upright is tilted
forward and back. The CG moves up and down as the upright moves up and down. -
ANSWERTrue
The poit at which weight is balanced on a PIT is called - ANSWERCenter of gravity
The connecting lines between the front wheels and pivot on the center axle is called
the - ANSWERStability Triangle
The steering in a forklift generally controls the _____ wheels? - ANSWERRear
When you remove your foot from the accelerator in most forklifts the truck will begin
to stop through the use of friction. - ANSWERTrue
When an attachment is fitted to a forklift, the dynamic and operating characteristics
may change, making if necessary to de-rate the forklift capacity and restrict some
operating controls. - ANSWERTrue
DAnger sign - ANSWERused to indicate an imminently hazardous situation that, if
not avoided, WILL result in Death
Caution sign - ANSWERused to indicate a potentially hazardous situation, that if not
avoided could result in minor or moderate injury.
Warning sign - ANSWERis used to indicate a potentially hazardous situation, that if
not avoided, could result in death or serious injury.
The distance from the front face of the forks (or the load face of an attachment) to
the center of the load is called the load the center - ANSWERTrue
