2025 MSSC QUALITY FINAL EXAM QUESTIONS WITH
ANSWERS 2025/2026 GRADED A+
what are the two types of assembly drawings? - exploded and basic
metals treated by ___________ processes become soft. - annealing
in the assembly drawing shown, part 3 screws into part___________. "watch for hidden
lines to verify part separation" - part 4
assembly drawings rely on reference letters or numbers to ___________. - identify the
individual parts.
a part measuring 2.54 inches is out of spec if the specification is - 2.00 +/- .53
the maximum material condition for the part shown is ___________. " upper number is
15.75 lower is 15.70." - 15.75
which dimension on a production drawing has the most accuracy? - the one with the
most decimal places
if 4 percent of 1200 production pieces are out of spec, how many are out of spec? "1200
/ 100 then that times the percent, or 1200 x 4%" - 48
the equipment at a workstation is producing parts at 2.593 and has a spec limit of +/-
.004. is a part that has been produced at 2.590 out of spec? - no it is within spec
if a drawing shows a part with a diameter of 1.275 +/- .003, what is the min and max
size allowed? - 1.278 and 1.272
which of the following part lengths is out of spec if the specification calls for a part length
of 3.202 (+/- 0.003) - 3.197
a part measuring 44.85 mm in a process with a tolerance of 45mm +/- .28 is
considered___________. - in spec within tolerance range
the specifications for the length of produced parts is 5.146 inches with a tolerance of +/-
0.005. is a part that has been produces at 5.140 inches out of spec? - yes, it is out of
spec
a 100% inspection of a new product revelaed that a run of 200 parts resulted in several
part being rejected. if the rejection rate was 3%, how many bad parts were created?
"200x3%" - 6
, the least material condition for the part shown is ___________. "two values given on
cross section of thick walled pipe are 0.75 and 0.73 the arrow is pointing at the hole. " -
0.75
the term ___________ refers to a physical portion of a part. - feature
length, width, height, diameter and hole diameter are all examples of ___________. -
features of size
the graphic shown is an example of ___________ dimensioning. "square with steps and
all steps have lengths on them" - baseline
A running fit is also called a(n) __________. - sliding fit
form, profiler, orientation, location and runout are shown by - GD&T
geometric dimensioning and tolerancing uses ___________ to represent features and
tolerances. - Symbols
a letter with a box around it is a standard notation symbol used to indicate a(n)
___________. - datum feature
a datum feature symbol can be connected to ___________.
a-the left/bottom of an extension line
b-a leader line
c-any of the above
d-the right/top of an extension line - c-any of the above
datums are a point of reference to establish ___________ - datum features
a(n) ___________ is a theoretically prefect line, point or plane that is located by a
similar feature of the part. - datum
examples of ___________ tolerance describe the form and orientation of a part. - profile
GD&T ___________ - allows certain tolerances on part features to be increased
the tolerance for a geometric feature can be easily identified by reading the
___________. - feature control frame
A feature control frame is NOT used to describe __________. - measurements
Two systems of dimensional measurement used in manufacturing are the SI metric
system and the ___________. - US customary system
ANSWERS 2025/2026 GRADED A+
what are the two types of assembly drawings? - exploded and basic
metals treated by ___________ processes become soft. - annealing
in the assembly drawing shown, part 3 screws into part___________. "watch for hidden
lines to verify part separation" - part 4
assembly drawings rely on reference letters or numbers to ___________. - identify the
individual parts.
a part measuring 2.54 inches is out of spec if the specification is - 2.00 +/- .53
the maximum material condition for the part shown is ___________. " upper number is
15.75 lower is 15.70." - 15.75
which dimension on a production drawing has the most accuracy? - the one with the
most decimal places
if 4 percent of 1200 production pieces are out of spec, how many are out of spec? "1200
/ 100 then that times the percent, or 1200 x 4%" - 48
the equipment at a workstation is producing parts at 2.593 and has a spec limit of +/-
.004. is a part that has been produced at 2.590 out of spec? - no it is within spec
if a drawing shows a part with a diameter of 1.275 +/- .003, what is the min and max
size allowed? - 1.278 and 1.272
which of the following part lengths is out of spec if the specification calls for a part length
of 3.202 (+/- 0.003) - 3.197
a part measuring 44.85 mm in a process with a tolerance of 45mm +/- .28 is
considered___________. - in spec within tolerance range
the specifications for the length of produced parts is 5.146 inches with a tolerance of +/-
0.005. is a part that has been produces at 5.140 inches out of spec? - yes, it is out of
spec
a 100% inspection of a new product revelaed that a run of 200 parts resulted in several
part being rejected. if the rejection rate was 3%, how many bad parts were created?
"200x3%" - 6
, the least material condition for the part shown is ___________. "two values given on
cross section of thick walled pipe are 0.75 and 0.73 the arrow is pointing at the hole. " -
0.75
the term ___________ refers to a physical portion of a part. - feature
length, width, height, diameter and hole diameter are all examples of ___________. -
features of size
the graphic shown is an example of ___________ dimensioning. "square with steps and
all steps have lengths on them" - baseline
A running fit is also called a(n) __________. - sliding fit
form, profiler, orientation, location and runout are shown by - GD&T
geometric dimensioning and tolerancing uses ___________ to represent features and
tolerances. - Symbols
a letter with a box around it is a standard notation symbol used to indicate a(n)
___________. - datum feature
a datum feature symbol can be connected to ___________.
a-the left/bottom of an extension line
b-a leader line
c-any of the above
d-the right/top of an extension line - c-any of the above
datums are a point of reference to establish ___________ - datum features
a(n) ___________ is a theoretically prefect line, point or plane that is located by a
similar feature of the part. - datum
examples of ___________ tolerance describe the form and orientation of a part. - profile
GD&T ___________ - allows certain tolerances on part features to be increased
the tolerance for a geometric feature can be easily identified by reading the
___________. - feature control frame
A feature control frame is NOT used to describe __________. - measurements
Two systems of dimensional measurement used in manufacturing are the SI metric
system and the ___________. - US customary system
