TCFP & GFD HAZMAT AWARENESS/OPS TEST /
490+ QUESTIONS WITH DETAILED VERIFIED
ANSWERS / ALREADY GRADED A / 2025
Terms in this set (495)
Substances or materials in hazardous material
quantities or forms that may
pose an unreasonable risk to
health, safety, or property
when transported, stored, or
used in commerce is a
definition for a:
When dealing with a Time, distance, shielding
radiological incident
involving a leak or spill, what
exposure guidelines should
the hazmat first responder
use to minimize radioactive
contamination?
A reference book intended as DOT, Emergency Response Guidebook
a guide to aid emergency
responders to guide quickly
and identify specific hazards
during the initial phase is
the:
,The two types of potential health and fire/explosion
hazards found in each guide
of the Emergency
Response Guidebook are:
The steps that are taken to protective actions
preserve the health and
safety of emergency
responders and the public
during an incident involving
releases of hazardous
materials are called:
The most important part of recognizing the presence of hazardous materials
assessment is:
Which information should Container type
be provided during the
notifications?
Statement 1: CERCLA Statements 1 and 2 are true; statement 3 is false
established prohibitions and
requirements concerning
closed and abandoned
hazardous waste sites.
Statement 2: A trust fund to
provide for cleanup when no
responsible party could be
identified was established by
CERCLA Statement 3: CERCLA
is part of Code of Federal
Regulations (CFR) 1910.120
, Radioactive Yellow-III
Which of the package labels
listed below indicates the
highest radiation hazard?
Federal law requires that hazardous materials are used or stored on site
local establishments keep a
Material Safety Data Sheet
on file when:
A major difference can be more complex
between a hazardous
materials incident and
other types of
emergencies is the fact
that hazmat incidents:
All cylinders should be pressurized
considered dangerous,
regardless of what type of
hazardous material it
contains, because the
contents are:
The four-digit number United Nations (UN) product identification number
appearing on a placard or an
orange panel of a tank car is
the:
The National Fire general hazard and degree of severity
Protection Association 704
System for identifying
hazardous materials gives:
, severe
A number 4 in the blue
quadrant of the National
Fire Protection
Association 704 System
indicates that there is
______ risk in this category
from the chemical involved
A white quadrant in the 6 special hazards
o'clock position of the
NFPA 704 system is used to
indicate:
the fact that a product is blue
water reactive would be
indicated in the ________
quadrant of the NFPA 704
system
United giving the UN hazard class number
Nations/Department of
Transportation (UN/DOT)
placards indicate general
hazard recognition by:
a bill of lading contains highway truck
valuable information about
the origin of the product and
is the type of shipping paper
used when transporting a
product via:
for materials in hazard class 8 1001 lbs
(corrosive), a DOT placard is
required if the gross weight is
in excess of:
490+ QUESTIONS WITH DETAILED VERIFIED
ANSWERS / ALREADY GRADED A / 2025
Terms in this set (495)
Substances or materials in hazardous material
quantities or forms that may
pose an unreasonable risk to
health, safety, or property
when transported, stored, or
used in commerce is a
definition for a:
When dealing with a Time, distance, shielding
radiological incident
involving a leak or spill, what
exposure guidelines should
the hazmat first responder
use to minimize radioactive
contamination?
A reference book intended as DOT, Emergency Response Guidebook
a guide to aid emergency
responders to guide quickly
and identify specific hazards
during the initial phase is
the:
,The two types of potential health and fire/explosion
hazards found in each guide
of the Emergency
Response Guidebook are:
The steps that are taken to protective actions
preserve the health and
safety of emergency
responders and the public
during an incident involving
releases of hazardous
materials are called:
The most important part of recognizing the presence of hazardous materials
assessment is:
Which information should Container type
be provided during the
notifications?
Statement 1: CERCLA Statements 1 and 2 are true; statement 3 is false
established prohibitions and
requirements concerning
closed and abandoned
hazardous waste sites.
Statement 2: A trust fund to
provide for cleanup when no
responsible party could be
identified was established by
CERCLA Statement 3: CERCLA
is part of Code of Federal
Regulations (CFR) 1910.120
, Radioactive Yellow-III
Which of the package labels
listed below indicates the
highest radiation hazard?
Federal law requires that hazardous materials are used or stored on site
local establishments keep a
Material Safety Data Sheet
on file when:
A major difference can be more complex
between a hazardous
materials incident and
other types of
emergencies is the fact
that hazmat incidents:
All cylinders should be pressurized
considered dangerous,
regardless of what type of
hazardous material it
contains, because the
contents are:
The four-digit number United Nations (UN) product identification number
appearing on a placard or an
orange panel of a tank car is
the:
The National Fire general hazard and degree of severity
Protection Association 704
System for identifying
hazardous materials gives:
, severe
A number 4 in the blue
quadrant of the National
Fire Protection
Association 704 System
indicates that there is
______ risk in this category
from the chemical involved
A white quadrant in the 6 special hazards
o'clock position of the
NFPA 704 system is used to
indicate:
the fact that a product is blue
water reactive would be
indicated in the ________
quadrant of the NFPA 704
system
United giving the UN hazard class number
Nations/Department of
Transportation (UN/DOT)
placards indicate general
hazard recognition by:
a bill of lading contains highway truck
valuable information about
the origin of the product and
is the type of shipping paper
used when transporting a
product via:
for materials in hazard class 8 1001 lbs
(corrosive), a DOT placard is
required if the gross weight is
in excess of:
