ASE B6 Test - Damage Analysis &
Estimating
"LS B/S mldg" is nomenclature for... - ANS-left side body facet molding
"Set up and degree" refers to what? - ANS-The dollar allowance for the time a technician wishes
to mount a automobile on a repair machine to degree duration, width from middle-line and peak
from the datum plane.
A CV joint is likewise known as a... - ANS-Constant pace Joint.
A hybrid vehicles electric traction vehicles operate on... - ANS-650 volts. While some
components may also run on 12 volts, a few Nickel Metal Hydride (NiMH) batteries incorporate
as a good deal as 650 volts
According to a few manufacturers,, a kinked frame rail must be __________ and now not
repaired. - ANS-Replaced. A kink is described as a pointy bend with a small radius, commonly
more than ninety levels over a short distance.
Additional fabric and charges encompass: - ANS-Caulk, refrigerants (R12 & R134a),sounds
deadners, clips, hardware, car covers for paint protecting, coolant, washing machine fluid,
lubricants (transmission fluid/brake fluid/ power guidance fluid, and so forth), structural bonding
cloth, and so forth.
Airbag machine additives encompass: - ANS-Airbag module, side curtain module, clock spring,
harness, cable, reel, control unit, labeling, sensors and a harness to the sensors.
An instance of a one time, unmarried use component is... - ANS-airbag
Another signal of earlier maintenance is inconsistent _____ ______ thickness. - ANS-" paint
movie" . This may be measured with paint film thickness or mil gauges. OEM paint will degree in
the range of 3.Five to 5.Five mils (refinished panels can double that and a mixed panel can be
as an awful lot as 50% extra in thickness.)
Another term regularly used to describe "harm" is____________. - ANS-Nonconformity.
Anytime there may be structural harm to a unitized vehicle, or if a wheel or tire is broken or
shows signs of effect, what should be included in your estimate? - ANS-a four wheel alignment.
Appraiser A says all brake fluid have to be drained and replaced whilst changing a caliper on
the left the front of a six-month antique vehicle. Appraiser B saya all that is required is refilling
the brake fluid and bleeding the system. Who is right? A, B, Both A & B, Neither A or B? -
ANS-Appraiser B best. Although brake fluid does end up infected with moisture over the years,
this isn't possibly on a 6 month vintage automobile.
Appraiser A says garage fees are calculated according to day at the winning marketplace price.
Appraiser B says they're calculated at the shop's posted fee. Who is proper? A, B, A & B,
neither A or B? - ANS-Appraiser B only. The save in possession of the automobile can charge
something they want, although most coverage businesses will handiest pay for prices that
correspond to affordable marketplace expenses.
, Appraiser A Says the manufacturing facility E-coat corrosion protection have to get replaced
anytime it is damaged in a collision. Appraiser B says the E-coat must be restored to a level
equal to that created at the factory. Who is proper? A, B, A & B, neither A or B? - ANS-Both A &
B. The manufacturing unit E-coat need to always get replaced whilst broken and it must be
accomplished to a degree equal with the manufacturing facility work.
Are insurance corporations chargeable for the replacement aftermarket parts, inclusive of rims,
suspension, stereos, etc? (as opposed to putting lower back OEM elements) - ANS-Yes - the
vehicle proprietor are entitled to have the automobile restored to its pre-loss circumstance.
Some matters though (like tires) may be situation to betterment adjustments
BC/CC stands for... - ANS-Base coat/ Clear coat
Bearing harm is often undetected till the vehicle is..... - ANS-operated on the road.
Bent seat attaching hardware, damaged motor mounts, cracked transmission instances or
damaged electronic additives are all examples of _________ damage. - ANS-Indirect. You
ought to hint the energy into the car shape and looks intently for kinks, buckles and other signs
and symptoms of distortion.
Clean up time in reference to salvage elements manner to.... - ANS-Remove the oil and grease
from the elements. The portray is a separate billable cost.
Damage in ______ _________ cars can regularly be tougher to come across in a initial
inspection. - ANS-Full body motors.
ETRs stands for.... - ANS-Emergency Tensioning Retractors (seatbelt tensioners)
Exhaust additives encompass... - ANS-exhaust pipes, catalytic converters, mufflers, resonators
and tailpipes. (oxygen sensors are aside of the engine control controls)
Faster grades are marked with SAE markings stamped on the bolt. The higher the grade, the....
- ANS-Stronger the bolt. Three strains = grade five, four= grade 6, five = grade 7, 6 = grade 8
hardware.
Galvanic corrosion is while.... - ANS-assorted metals come into contact and corrosion can occur
(including an allumunum hood connected to metallic hinges). This is averted by way of the use
of coated bolts. These bolts usualy have a green coating and must get replaced with new ones
(one time use fasteners).
Generally, these forms of automobiles are NOT excellent applicants for repairable cars: -
ANS-Flood motors and vehicles that have had fires. Also, automobiles which have had most
important driveline damage (engine or transmission crushed).
How to you take a look at a form of plastic if you cannot locate and figuring out symbol or label?
- ANS-Shave a piece of plastic off of the concern component, drop it into a bucket of water.
Thermoplastics will waft and thermoset plastics will sink.
In shops with Direct Repair Programs (DRP's), the store appraiser becomes the... - ANS-de
facto coverage appraiser.
In a few instances, salvage sections taken from a unibody automobile will extra carefully mirror
the pre-loss condition. It can also be extra... - ANS-Cost effective, due to the fact it could store a
whole lot of hard work hours repairing something that may be purchased at a salvage yard.
Safety related elements, but, are seldom replaced with salvage elements (seatbelts, airbags,
etc.).
Is aluminum repairable? - ANS-Yes. Aluminum internal systems, consisting of those used at the
five series BMW sedans, require using rivets and structural adhesives for his or her alternative.
Estimating
"LS B/S mldg" is nomenclature for... - ANS-left side body facet molding
"Set up and degree" refers to what? - ANS-The dollar allowance for the time a technician wishes
to mount a automobile on a repair machine to degree duration, width from middle-line and peak
from the datum plane.
A CV joint is likewise known as a... - ANS-Constant pace Joint.
A hybrid vehicles electric traction vehicles operate on... - ANS-650 volts. While some
components may also run on 12 volts, a few Nickel Metal Hydride (NiMH) batteries incorporate
as a good deal as 650 volts
According to a few manufacturers,, a kinked frame rail must be __________ and now not
repaired. - ANS-Replaced. A kink is described as a pointy bend with a small radius, commonly
more than ninety levels over a short distance.
Additional fabric and charges encompass: - ANS-Caulk, refrigerants (R12 & R134a),sounds
deadners, clips, hardware, car covers for paint protecting, coolant, washing machine fluid,
lubricants (transmission fluid/brake fluid/ power guidance fluid, and so forth), structural bonding
cloth, and so forth.
Airbag machine additives encompass: - ANS-Airbag module, side curtain module, clock spring,
harness, cable, reel, control unit, labeling, sensors and a harness to the sensors.
An instance of a one time, unmarried use component is... - ANS-airbag
Another signal of earlier maintenance is inconsistent _____ ______ thickness. - ANS-" paint
movie" . This may be measured with paint film thickness or mil gauges. OEM paint will degree in
the range of 3.Five to 5.Five mils (refinished panels can double that and a mixed panel can be
as an awful lot as 50% extra in thickness.)
Another term regularly used to describe "harm" is____________. - ANS-Nonconformity.
Anytime there may be structural harm to a unitized vehicle, or if a wheel or tire is broken or
shows signs of effect, what should be included in your estimate? - ANS-a four wheel alignment.
Appraiser A says all brake fluid have to be drained and replaced whilst changing a caliper on
the left the front of a six-month antique vehicle. Appraiser B saya all that is required is refilling
the brake fluid and bleeding the system. Who is right? A, B, Both A & B, Neither A or B? -
ANS-Appraiser B best. Although brake fluid does end up infected with moisture over the years,
this isn't possibly on a 6 month vintage automobile.
Appraiser A says garage fees are calculated according to day at the winning marketplace price.
Appraiser B says they're calculated at the shop's posted fee. Who is proper? A, B, A & B,
neither A or B? - ANS-Appraiser B only. The save in possession of the automobile can charge
something they want, although most coverage businesses will handiest pay for prices that
correspond to affordable marketplace expenses.
, Appraiser A Says the manufacturing facility E-coat corrosion protection have to get replaced
anytime it is damaged in a collision. Appraiser B says the E-coat must be restored to a level
equal to that created at the factory. Who is proper? A, B, A & B, neither A or B? - ANS-Both A &
B. The manufacturing unit E-coat need to always get replaced whilst broken and it must be
accomplished to a degree equal with the manufacturing facility work.
Are insurance corporations chargeable for the replacement aftermarket parts, inclusive of rims,
suspension, stereos, etc? (as opposed to putting lower back OEM elements) - ANS-Yes - the
vehicle proprietor are entitled to have the automobile restored to its pre-loss circumstance.
Some matters though (like tires) may be situation to betterment adjustments
BC/CC stands for... - ANS-Base coat/ Clear coat
Bearing harm is often undetected till the vehicle is..... - ANS-operated on the road.
Bent seat attaching hardware, damaged motor mounts, cracked transmission instances or
damaged electronic additives are all examples of _________ damage. - ANS-Indirect. You
ought to hint the energy into the car shape and looks intently for kinks, buckles and other signs
and symptoms of distortion.
Clean up time in reference to salvage elements manner to.... - ANS-Remove the oil and grease
from the elements. The portray is a separate billable cost.
Damage in ______ _________ cars can regularly be tougher to come across in a initial
inspection. - ANS-Full body motors.
ETRs stands for.... - ANS-Emergency Tensioning Retractors (seatbelt tensioners)
Exhaust additives encompass... - ANS-exhaust pipes, catalytic converters, mufflers, resonators
and tailpipes. (oxygen sensors are aside of the engine control controls)
Faster grades are marked with SAE markings stamped on the bolt. The higher the grade, the....
- ANS-Stronger the bolt. Three strains = grade five, four= grade 6, five = grade 7, 6 = grade 8
hardware.
Galvanic corrosion is while.... - ANS-assorted metals come into contact and corrosion can occur
(including an allumunum hood connected to metallic hinges). This is averted by way of the use
of coated bolts. These bolts usualy have a green coating and must get replaced with new ones
(one time use fasteners).
Generally, these forms of automobiles are NOT excellent applicants for repairable cars: -
ANS-Flood motors and vehicles that have had fires. Also, automobiles which have had most
important driveline damage (engine or transmission crushed).
How to you take a look at a form of plastic if you cannot locate and figuring out symbol or label?
- ANS-Shave a piece of plastic off of the concern component, drop it into a bucket of water.
Thermoplastics will waft and thermoset plastics will sink.
In shops with Direct Repair Programs (DRP's), the store appraiser becomes the... - ANS-de
facto coverage appraiser.
In a few instances, salvage sections taken from a unibody automobile will extra carefully mirror
the pre-loss condition. It can also be extra... - ANS-Cost effective, due to the fact it could store a
whole lot of hard work hours repairing something that may be purchased at a salvage yard.
Safety related elements, but, are seldom replaced with salvage elements (seatbelts, airbags,
etc.).
Is aluminum repairable? - ANS-Yes. Aluminum internal systems, consisting of those used at the
five series BMW sedans, require using rivets and structural adhesives for his or her alternative.
