CR101B Introduction to Collision Repair
A carcinogen is a substance that reasons: - ANS-cancer
A Class B hearth extinguisher may be used on a: - ANS-burning solvent.
A clay bar used for detailing: - ANS-isn't always effective on a porous floor.
A flammable fabric: - ANS-can without difficulty catch hearth and burn hastily or explosively.
A hand wet sanding process calls for 3 regularly finer grits of sandpaper. Technician A says to
cross the first two grits diagonally.Technician B says to sand along body lines with the finest grit.
Who is right? - ANS-Both A and B
A label on a twig bottle of a acknowledged solution has washed off.Technician A says that the
label statistics or label have to get replaced as quickly as feasible. Technician B says that the
solution must get replaced as soon as possible.Who is proper? - ANS-A most effective
A portion of the declare that must be paid for by means of the policy holder is referred to as a
(an): - ANS-deductible.
A complement is a: - ANS-change to the damage file.
A technician has showed that spots at the floor are as a result of acid rain. When treating acid
rain, it's far essential to: - ANS-neutralize the acid.
After getting rid of a disorder from a vehicle that has simply been refinished, usually how a lot
clearcoat or single-stage topcoat must continue to be? - ANS-1 mil
After washing a vehicle with vehicle wash cleaning soap, rinse using a: - ANS-hose with out the
nozzle attached.
All of those are designed to soak up collision energy EXCEPT: - ANS-reinforcements.
All of those are important for a complete circuit EXCEPT a: - ANS-fuse
All of these are different names for an estimate EXCEPT: - ANS-repair order.
All of those are levels in the adhesive bonding method EXCEPT: - ANS-mix time.
All of these are degrees of the spot weld procedure EXCEPT: - ANS-launch time.
All of those are genuine approximately a magnesium part EXCEPT that it - ANS-is commonly
made from stampings
All of these are actual about aluminum EXCEPT that it: - ANS-is resistant to galvanic corrosion
All of these are true about blind rivets EXCEPT that they: - ANS-may be self-piercing.
All of these are genuine about carbon fiber elements EXCEPT that: - ANS-they're a combination
of fiberglass and carbon fibers.
All of these are proper about GMA (MIG) welding EXCEPT that: - ANS-the welding gun liner
regulates the defensive fuel.
All of these are genuine about metallic EXCEPT that: - ANS-warmness tends to bolster
excessive-strength metal.
All of those are kinds of wheel alignments EXCEPT: - ANS-guidance attitude.
All of these may be covered on a care tip sheet given to the client EXCEPT: - ANS-use clay to
take away embedded rail dirt.
All of those may be limitations for the usage of spot welding EXCEPT: - ANS-electrode wire size.
All steels are alloys that incorporate a aggregate of iron and: - ANS-carbon.
, An inspection of a newly refinished surface is being completed by the detailing technician while
the vehicle is in the spraybooth.Technician A says that that is beneficial in order that shade
sanding may be finished earlier than the vehicle leaves the spraybooth.Technician B says that
that is useful to allow the refinish technician to use more clearcoat to a place which can want
sanding and buffing.Who is proper? - ANS-B best
Electronic ferrous film thickness gauges: - ANS-can read in tenths of one mil.
Forcing a stable piece of heated aluminum thru a die forms: - ANS-an extruded part
Hepatitis B is taken into consideration: - ANS-a blood borne pathogen.
If a box does now not have a label, a technician must: - ANS-avoid handling cloth till diagnosed.
Information on cleansing a unsafe cloth spill can be found in what segment of an SDS? -
ANS-Accidental Release Measures
Knowledge of the pH scale is useful for figuring out whether to use: - ANS-all-reason purifier or
a vinegar answer.
Olfactory fatigue is while a person: - ANS-can now not odor a chemical after exposure.
Partial teardown is performed for the estimating process to: - ANS-find any hidden harm.
Technician A says that a cold knife is pneumatic.Technician B says that a twine tool may be
used for getting rid of some trim.Who is right? - ANS-B only
Technician A says that a film thickness gauge may be used to locate body filler.Technician B
says that paint film is usually thicker on vertical panels than on horizontal panels.Who is right? -
ANS-A best
Technician A says that a warmth gun may be used to do away with trademarks.Technician B
says that a mixing board is used for blending paint.Who is right? - ANS-A most effective
Technician A says that a magnetic film thickness gauge is effective for tracking movie thickness
while detailing.Technician B says that a virtual film thickness gauge is effective for monitoring
movie thickness while detailing.Who is proper? - ANS-B simplest
Technician A says that a magnifier may be able to decide if a illness has etched into the
floor.Technician B says that a magnifier may be capable of decide the depth of a scratch. Who is
proper? - ANS-Both A and B
Technician A says that a rotary buffer should now not exceed 2000 rpm at the same time as
buffing.Technician B says that a rotary buffer ought to be commenced while resting on the
panel.Who is right? - ANS-Both A and B
Technician A says that a steering column can be designed to take in electricity. Technician B
says that vehicle seats may be designed to take in electricity.
Who is right? - ANS-Both A and B
Technician A says that a artificial chamois can be used to dry a vehicle.Technician B says that a
cotton terry towel may be used to dry a vehicle.Who is proper? - ANS-Both A and B
Technician A says that a vinegar-primarily based cleaner may be used for cleaning glass with
aftermarket window tinting.Technician B says that an ammonia-based cleanser can be used for
cleaning glass with aftermarket window tinting.Who is right? - ANS-A handiest
Technician A says that acid rain does the most harm while it first falls on a end.Technician B
says that tough water recognizing is usually only a surface hassle that may be washed off.Who
is right? - ANS-B best
A carcinogen is a substance that reasons: - ANS-cancer
A Class B hearth extinguisher may be used on a: - ANS-burning solvent.
A clay bar used for detailing: - ANS-isn't always effective on a porous floor.
A flammable fabric: - ANS-can without difficulty catch hearth and burn hastily or explosively.
A hand wet sanding process calls for 3 regularly finer grits of sandpaper. Technician A says to
cross the first two grits diagonally.Technician B says to sand along body lines with the finest grit.
Who is right? - ANS-Both A and B
A label on a twig bottle of a acknowledged solution has washed off.Technician A says that the
label statistics or label have to get replaced as quickly as feasible. Technician B says that the
solution must get replaced as soon as possible.Who is proper? - ANS-A most effective
A portion of the declare that must be paid for by means of the policy holder is referred to as a
(an): - ANS-deductible.
A complement is a: - ANS-change to the damage file.
A technician has showed that spots at the floor are as a result of acid rain. When treating acid
rain, it's far essential to: - ANS-neutralize the acid.
After getting rid of a disorder from a vehicle that has simply been refinished, usually how a lot
clearcoat or single-stage topcoat must continue to be? - ANS-1 mil
After washing a vehicle with vehicle wash cleaning soap, rinse using a: - ANS-hose with out the
nozzle attached.
All of those are designed to soak up collision energy EXCEPT: - ANS-reinforcements.
All of those are important for a complete circuit EXCEPT a: - ANS-fuse
All of these are different names for an estimate EXCEPT: - ANS-repair order.
All of those are levels in the adhesive bonding method EXCEPT: - ANS-mix time.
All of these are degrees of the spot weld procedure EXCEPT: - ANS-launch time.
All of those are genuine approximately a magnesium part EXCEPT that it - ANS-is commonly
made from stampings
All of these are actual about aluminum EXCEPT that it: - ANS-is resistant to galvanic corrosion
All of these are true about blind rivets EXCEPT that they: - ANS-may be self-piercing.
All of these are genuine about carbon fiber elements EXCEPT that: - ANS-they're a combination
of fiberglass and carbon fibers.
All of these are proper about GMA (MIG) welding EXCEPT that: - ANS-the welding gun liner
regulates the defensive fuel.
All of these are genuine about metallic EXCEPT that: - ANS-warmness tends to bolster
excessive-strength metal.
All of those are kinds of wheel alignments EXCEPT: - ANS-guidance attitude.
All of these may be covered on a care tip sheet given to the client EXCEPT: - ANS-use clay to
take away embedded rail dirt.
All of those may be limitations for the usage of spot welding EXCEPT: - ANS-electrode wire size.
All steels are alloys that incorporate a aggregate of iron and: - ANS-carbon.
, An inspection of a newly refinished surface is being completed by the detailing technician while
the vehicle is in the spraybooth.Technician A says that that is beneficial in order that shade
sanding may be finished earlier than the vehicle leaves the spraybooth.Technician B says that
that is useful to allow the refinish technician to use more clearcoat to a place which can want
sanding and buffing.Who is proper? - ANS-B best
Electronic ferrous film thickness gauges: - ANS-can read in tenths of one mil.
Forcing a stable piece of heated aluminum thru a die forms: - ANS-an extruded part
Hepatitis B is taken into consideration: - ANS-a blood borne pathogen.
If a box does now not have a label, a technician must: - ANS-avoid handling cloth till diagnosed.
Information on cleansing a unsafe cloth spill can be found in what segment of an SDS? -
ANS-Accidental Release Measures
Knowledge of the pH scale is useful for figuring out whether to use: - ANS-all-reason purifier or
a vinegar answer.
Olfactory fatigue is while a person: - ANS-can now not odor a chemical after exposure.
Partial teardown is performed for the estimating process to: - ANS-find any hidden harm.
Technician A says that a cold knife is pneumatic.Technician B says that a twine tool may be
used for getting rid of some trim.Who is right? - ANS-B only
Technician A says that a film thickness gauge may be used to locate body filler.Technician B
says that paint film is usually thicker on vertical panels than on horizontal panels.Who is right? -
ANS-A best
Technician A says that a warmth gun may be used to do away with trademarks.Technician B
says that a mixing board is used for blending paint.Who is right? - ANS-A most effective
Technician A says that a magnetic film thickness gauge is effective for tracking movie thickness
while detailing.Technician B says that a virtual film thickness gauge is effective for monitoring
movie thickness while detailing.Who is proper? - ANS-B simplest
Technician A says that a magnifier may be able to decide if a illness has etched into the
floor.Technician B says that a magnifier may be capable of decide the depth of a scratch. Who is
proper? - ANS-Both A and B
Technician A says that a rotary buffer should now not exceed 2000 rpm at the same time as
buffing.Technician B says that a rotary buffer ought to be commenced while resting on the
panel.Who is right? - ANS-Both A and B
Technician A says that a steering column can be designed to take in electricity. Technician B
says that vehicle seats may be designed to take in electricity.
Who is right? - ANS-Both A and B
Technician A says that a artificial chamois can be used to dry a vehicle.Technician B says that a
cotton terry towel may be used to dry a vehicle.Who is proper? - ANS-Both A and B
Technician A says that a vinegar-primarily based cleaner may be used for cleaning glass with
aftermarket window tinting.Technician B says that an ammonia-based cleanser can be used for
cleaning glass with aftermarket window tinting.Who is right? - ANS-A handiest
Technician A says that acid rain does the most harm while it first falls on a end.Technician B
says that tough water recognizing is usually only a surface hassle that may be washed off.Who
is right? - ANS-B best
