ECS tabs UPDATED ACTUAL Exam
Questions and CORRECT Answers
What are the alert states? - CORRECT ANSWER - 1. ABT 2. TBM 3. Passive search 4.
Radiate- disable 5. CDR discretion 6. Maintenance 7. Destroyed / nmc 0. In transit
What switch indicator must be activated while putting data into TAB 72? - CORRECT
ANSWER - Masked terrain/ maps
What tab do you set the RLRIU address for the FU? - CORRECT ANSWER - TAB 68
What is RHI? - CORRECT ANSWER - Range height indicator
How many traces are there in RHI? - CORRECT ANSWER - 21
What is the maximum left to right width for RHI? - CORRECT ANSWER - 42km
What is PPI? - CORRECT ANSWER - Plan position indicator
How many beams are in PPI? - CORRECT ANSWER - 15
How are PPI beams arranged? - CORRECT ANSWER - 3 sets of 5
What is the maximum length of the EPP power cables? - CORRECT ANSWER - 75 ft.
What is the maximum usable length of the EPP power cables? - CORRECT ANSWER -
60ft.
,During initialization, the NFS alignment accuracy UTM coordinate can be no more than
__________ from the actual radar location? - CORRECT ANSWER - 40km / 50 m by
raytheon.
How many pages does the ECS volumes tabs have? - CORRECT ANSWER - 55
What tab is used for TBM discrimination parameters? - CORRECT ANSWER - Tab 15
What Tab displays specific threats to your theater of operations? - CORRECT ANSWER -
Tab 44
What Tab would you use to configure the system to automatically engage TBM B? - CORRECT
ANSWER - Tab 78
How many hours of Mode 1 & 3 codes can be input into Tab 73? - CORRECT ANSWER -
48 hours
What is the highest number of canisters that can be stacked in the MSA? - CORRECT
ANSWER -4
What should you map first, the PTL or the STL? - CORRECT ANSWER - STL
Where is the FP search mode located in your tabs? - CORRECT ANSWER - Tab 1, page 2
What tab alows you to create a virtual target? - CORRECT ANSWER - Tab 4
Brevity code timber means what? - CORRECT ANSWER - TADIL-J
What is ECS tab 13? - CORRECT ANSWER - Data base initialization selection
,Local LSs must be emplaced at a minimum of how far away from each other? - CORRECT
ANSWER - 90 meters
Which S/I displays the situation centered relative to the cursor selected position? - CORRECT
ANSWER - Offset
What is ECS Tab 68? - CORRECT ANSWER - Data communications control
Which tab can display the 5 most recent radar faults? - CORRECT ANSWER - Tab 32
What tab and page is ADW programmed in? - CORRECT ANSWER - Tab 1, page 1
Within how many degrees of the PTL must each local ls be emplaced? - CORRECT
ANSWER - + or - 80 degrees
What does the second page of tab 2 allow? - CORRECT ANSWER - It allows the operator
to set the DLT and LS prime path modes
What is ECS tab 99? - CORRECT ANSWER - FP data transfer control
Where is launch point discrimination turned on? - CORRECT ANSWER - Tab 14, page 3
Where is a jammer strobe line display range entered? - CORRECT ANSWER - Tab 14,
page 2
What RSOP team member is responsible for setting up the OE-254? - CORRECT
ANSWER - RSOP OIC driver
, What are the range limits of RL-1? - CORRECT ANSWER - 1.3 to 10km
On what tab and page is ABT engagement range bias found? - CORRECT ANSWER - Tab
1, page 1
When doing ISLB, you should only consider terrain between _________km and _________km. -
CORRECT ANSWER - 3; 10km
What are the ID weight sets? - CORRECT ANSWER - 1-peacetime, 2-transition, 3-
wartime. TAB 1, page 1
What are the range limits of the RL-3? - CORRECT ANSWER - 6 to 30km
The RSOP evaluation has how many phases? - CORRECT ANSWER -4
Which S/I is used to destroy a missile in flight? - CORRECT ANSWER - Hold fire
Who directs the operator to gather RTG bite information? - CORRECT ANSWER - BMO
Which tab allows the operator to gather RTG bite faults detected during tactical operations? -
CORRECT ANSWER - Tab 30
Brevity code squawk means what? - CORRECT ANSWER - Target is emitting
Brevity code spades means what? - CORRECT ANSWER - No response
What are the authorizations found on page 1 of tab 1 in the ECS? - CORRECT ANSWER -
ECM, Pop-Up, minimum safe velocity, slow tgt eng, Mode 4 friend, SIF friend, assumed friend,
ARM class
Questions and CORRECT Answers
What are the alert states? - CORRECT ANSWER - 1. ABT 2. TBM 3. Passive search 4.
Radiate- disable 5. CDR discretion 6. Maintenance 7. Destroyed / nmc 0. In transit
What switch indicator must be activated while putting data into TAB 72? - CORRECT
ANSWER - Masked terrain/ maps
What tab do you set the RLRIU address for the FU? - CORRECT ANSWER - TAB 68
What is RHI? - CORRECT ANSWER - Range height indicator
How many traces are there in RHI? - CORRECT ANSWER - 21
What is the maximum left to right width for RHI? - CORRECT ANSWER - 42km
What is PPI? - CORRECT ANSWER - Plan position indicator
How many beams are in PPI? - CORRECT ANSWER - 15
How are PPI beams arranged? - CORRECT ANSWER - 3 sets of 5
What is the maximum length of the EPP power cables? - CORRECT ANSWER - 75 ft.
What is the maximum usable length of the EPP power cables? - CORRECT ANSWER -
60ft.
,During initialization, the NFS alignment accuracy UTM coordinate can be no more than
__________ from the actual radar location? - CORRECT ANSWER - 40km / 50 m by
raytheon.
How many pages does the ECS volumes tabs have? - CORRECT ANSWER - 55
What tab is used for TBM discrimination parameters? - CORRECT ANSWER - Tab 15
What Tab displays specific threats to your theater of operations? - CORRECT ANSWER -
Tab 44
What Tab would you use to configure the system to automatically engage TBM B? - CORRECT
ANSWER - Tab 78
How many hours of Mode 1 & 3 codes can be input into Tab 73? - CORRECT ANSWER -
48 hours
What is the highest number of canisters that can be stacked in the MSA? - CORRECT
ANSWER -4
What should you map first, the PTL or the STL? - CORRECT ANSWER - STL
Where is the FP search mode located in your tabs? - CORRECT ANSWER - Tab 1, page 2
What tab alows you to create a virtual target? - CORRECT ANSWER - Tab 4
Brevity code timber means what? - CORRECT ANSWER - TADIL-J
What is ECS tab 13? - CORRECT ANSWER - Data base initialization selection
,Local LSs must be emplaced at a minimum of how far away from each other? - CORRECT
ANSWER - 90 meters
Which S/I displays the situation centered relative to the cursor selected position? - CORRECT
ANSWER - Offset
What is ECS Tab 68? - CORRECT ANSWER - Data communications control
Which tab can display the 5 most recent radar faults? - CORRECT ANSWER - Tab 32
What tab and page is ADW programmed in? - CORRECT ANSWER - Tab 1, page 1
Within how many degrees of the PTL must each local ls be emplaced? - CORRECT
ANSWER - + or - 80 degrees
What does the second page of tab 2 allow? - CORRECT ANSWER - It allows the operator
to set the DLT and LS prime path modes
What is ECS tab 99? - CORRECT ANSWER - FP data transfer control
Where is launch point discrimination turned on? - CORRECT ANSWER - Tab 14, page 3
Where is a jammer strobe line display range entered? - CORRECT ANSWER - Tab 14,
page 2
What RSOP team member is responsible for setting up the OE-254? - CORRECT
ANSWER - RSOP OIC driver
, What are the range limits of RL-1? - CORRECT ANSWER - 1.3 to 10km
On what tab and page is ABT engagement range bias found? - CORRECT ANSWER - Tab
1, page 1
When doing ISLB, you should only consider terrain between _________km and _________km. -
CORRECT ANSWER - 3; 10km
What are the ID weight sets? - CORRECT ANSWER - 1-peacetime, 2-transition, 3-
wartime. TAB 1, page 1
What are the range limits of the RL-3? - CORRECT ANSWER - 6 to 30km
The RSOP evaluation has how many phases? - CORRECT ANSWER -4
Which S/I is used to destroy a missile in flight? - CORRECT ANSWER - Hold fire
Who directs the operator to gather RTG bite information? - CORRECT ANSWER - BMO
Which tab allows the operator to gather RTG bite faults detected during tactical operations? -
CORRECT ANSWER - Tab 30
Brevity code squawk means what? - CORRECT ANSWER - Target is emitting
Brevity code spades means what? - CORRECT ANSWER - No response
What are the authorizations found on page 1 of tab 1 in the ECS? - CORRECT ANSWER -
ECM, Pop-Up, minimum safe velocity, slow tgt eng, Mode 4 friend, SIF friend, assumed friend,
ARM class
