2W151 B Set ED 7 Exam: 100% Verified
Questions & Answers / Newest 2025-2026.
Terms in this set (300)
1. (001) The most d
commonly used powered
bomb lift trucks are the
a. MHU-196/E, MHU-
173,MHU-204/M, and MJ-40.
b. MJ-1/B, MHU-83,
MHU-196/E, and MJ-40.
c. MHU-83, MHU-204,
MJ-40, and MJ-1/B.
d. MJ-1/B, MHU-83,
andMJ-40.
a
2. (001) Which part of the
MJ-1/B controls the engine
speed?
a. Hand throttle located
tothe left of the steering
wheel.
b. Hand throttle located
tothe right of the steering
wheel.
c. Pedal located on
theleft side of the operator's
position.
d. Pedal located on
theright side of the
operator's position.
,3. (001) Changing the d
position of the MJ-1B
accelerator pedal
a. changes the
enginethrottle position.
b. increases/decreases
theengine rpms.
c. adjusts clutch force
inthe Ackerman drive.
d. varies the flow rate
ofthe pump in the
hydrostatic drive.
4. (001) Which part of the a
hydrostatic drive system is
supported by the lift arms
and used to hold the
munition or store to be
loaded?
a. Cradle assembly.
b. Hydraulic pump.
c. Hydraulic motor.
d. Cantilever lift arms.
d
5. (002) The lifting capacity
of the MJ-40 lift truck is
a. 2,450 pounds.
b. 3,000 pounds.
c. 7,000 pounds.
d. 10,000 pounds.
,6. (002) Which aircraft a
loading missions are
supported by the MJ-40
lift truck?
a. B-1, B-2.
b. B-1, B-2, B-52.
c. All fighter aircraft.
d. All Air Force aircraft.
7. (002) Which loading c
controls are found only on
the MJ-40 lift truck remote?
a. Boom up/down.
b. Yaw right/left.
c. Ram up/down.
d. Tilt right/left.
8. (003) What number of a
pounds is the lift capacity of
the MHU-83 lift truck? a.
7,000.
b. 6,000.
c. 3,000.
d. 1,250.
9. (003) Which fuel type is c
the MHU-83 lift truck
capable of using? a. Diesel
only.
b. Mogas only.
c. Diesel or JP-8.
d. Diesel, JP-8, or Mogas.
, 10. (003) The controls for b
adjusting the side frame
width of the MHU-83 lift
truck are located at the a.
remote control unit only.
b. operator's position
only.
c. forward end of
theboom only.
d. remote control unit
andoperator's position.
11. (003) Which device b
ensures the boom cannot fall
in the event hydraulic power
is loss, a component fails, or
a line breaks on the MHU-83
series lift trucks?
a. Cantilever valve.
b. Counterbalance
valve.
c. Hydraulic system
safetyinterlocks.
d. Mechanical
ratchetsafety interlocks.
a
12. (003) The MHU-83 lift
truck component used to lift
the front wheels off the
ground to allow side frame
width adjustment is the
a. lift boom.
b. outriggers.
c. jack assemblies.
d. fork assemblies.
Questions & Answers / Newest 2025-2026.
Terms in this set (300)
1. (001) The most d
commonly used powered
bomb lift trucks are the
a. MHU-196/E, MHU-
173,MHU-204/M, and MJ-40.
b. MJ-1/B, MHU-83,
MHU-196/E, and MJ-40.
c. MHU-83, MHU-204,
MJ-40, and MJ-1/B.
d. MJ-1/B, MHU-83,
andMJ-40.
a
2. (001) Which part of the
MJ-1/B controls the engine
speed?
a. Hand throttle located
tothe left of the steering
wheel.
b. Hand throttle located
tothe right of the steering
wheel.
c. Pedal located on
theleft side of the operator's
position.
d. Pedal located on
theright side of the
operator's position.
,3. (001) Changing the d
position of the MJ-1B
accelerator pedal
a. changes the
enginethrottle position.
b. increases/decreases
theengine rpms.
c. adjusts clutch force
inthe Ackerman drive.
d. varies the flow rate
ofthe pump in the
hydrostatic drive.
4. (001) Which part of the a
hydrostatic drive system is
supported by the lift arms
and used to hold the
munition or store to be
loaded?
a. Cradle assembly.
b. Hydraulic pump.
c. Hydraulic motor.
d. Cantilever lift arms.
d
5. (002) The lifting capacity
of the MJ-40 lift truck is
a. 2,450 pounds.
b. 3,000 pounds.
c. 7,000 pounds.
d. 10,000 pounds.
,6. (002) Which aircraft a
loading missions are
supported by the MJ-40
lift truck?
a. B-1, B-2.
b. B-1, B-2, B-52.
c. All fighter aircraft.
d. All Air Force aircraft.
7. (002) Which loading c
controls are found only on
the MJ-40 lift truck remote?
a. Boom up/down.
b. Yaw right/left.
c. Ram up/down.
d. Tilt right/left.
8. (003) What number of a
pounds is the lift capacity of
the MHU-83 lift truck? a.
7,000.
b. 6,000.
c. 3,000.
d. 1,250.
9. (003) Which fuel type is c
the MHU-83 lift truck
capable of using? a. Diesel
only.
b. Mogas only.
c. Diesel or JP-8.
d. Diesel, JP-8, or Mogas.
, 10. (003) The controls for b
adjusting the side frame
width of the MHU-83 lift
truck are located at the a.
remote control unit only.
b. operator's position
only.
c. forward end of
theboom only.
d. remote control unit
andoperator's position.
11. (003) Which device b
ensures the boom cannot fall
in the event hydraulic power
is loss, a component fails, or
a line breaks on the MHU-83
series lift trucks?
a. Cantilever valve.
b. Counterbalance
valve.
c. Hydraulic system
safetyinterlocks.
d. Mechanical
ratchetsafety interlocks.
a
12. (003) The MHU-83 lift
truck component used to lift
the front wheels off the
ground to allow side frame
width adjustment is the
a. lift boom.
b. outriggers.
c. jack assemblies.
d. fork assemblies.
