NCCER Carpentry Module 5 Exam 2025 Questions & Answers with 100% Correct Answers | Verified

Crown - The highest point of the curved edge of a framing member Dead load - The weight of permanent, stationary construction and equipment included in a building Dome pan - Metal or fiberglass concrete form used for two-way joist systems End joist - The first and last joists in a floor system; they run parallel to the common joists Fire stop - An approved material used to fill air passages in a frame to retard the spread of fire. Floor truss - An engineered assembly that is used to support floors Foundation - The supporting portion of a structure, including the footings Header - Used to frame floor openings; they run perpendicular to the direction of the joists and are typically doubled Header joist - A framing member used in platform framing into which the common joists are fitted. Header joists are also used to support the free ends of joists when framing openings in a floor Joist hanger - A metal stirrup secured to the face of a structural member, such as a girder, to support and align the ends of joists flush with the member Lateral pressure - Sideways pressure against a structure, such as a foundation Let-in - Any type of notch in a stud or joist, which holds another piece. The item that is supported by the notch is said to be let in