MASTER SERVICE TECHNICIAN CH. 1-
7 QUESTIONS & ANSWERS SOLVED
100% CORRECT!!
1 of
61
Term
A 55 gal. drum of engine oil needs to be moved from the level of the parking
lot to the back of a pick up truck. the bed of the truck is 3' above the flat
surface of the parking lot. the drum of oil weighs 500 lb. based on the
equation for work (W=FxD), 1500ft/lb of work will
accomplish the task.
Give this one a try later!
, Both A And B Dc Regulated
Technician B Neither A Nor B
Don't know?
2 of 61
Term
An engine is brought in for service with the customer complaint of
lack of power, high oil consumption, and repeated blown head
gaskets. Upon disassembly, all of the piston ring gaps are found to
be aligned and the head gasket is slightly burnt exhaust valve and
worn valve guide.
Give this one a try later!
The ring alignment The piston pin bore area
1/2 the stroke The govern idle speed
Don't know?
3 of 61
Term
,One quick and simple preliminary test for compression on a Briggs
& Stratton engine is to quickly rotate the engine counterclockwise
and observe the engine for a sharp rebound. Why must the engine
be
rotated counterclockwise as opposed to normal direction of
operation.
Give this one a try later!
As the cooling liquid temperature
decreases in the radiator, the cooler
1/2 the stroke
liquid will collect at the bottom
to be reused by the cooling
system.
Counterclockwise rotation on Technician b: to correct this
the power stroke problem, install a lighter rated
eliminates the compression spring and perform the normal
release system as it is
fixed speed governor adjustment
ineffective procedures
during this stroke
Don't know?
4 of 61
Term
The throttle plate in a Briggs & Stratton carburetor
Give this one a try later!
Increases or decreases the venturi
difference in air
pressure within the
, Controls the
ignition timing
for optimal
performance.
7 QUESTIONS & ANSWERS SOLVED
100% CORRECT!!
1 of
61
Term
A 55 gal. drum of engine oil needs to be moved from the level of the parking
lot to the back of a pick up truck. the bed of the truck is 3' above the flat
surface of the parking lot. the drum of oil weighs 500 lb. based on the
equation for work (W=FxD), 1500ft/lb of work will
accomplish the task.
Give this one a try later!
, Both A And B Dc Regulated
Technician B Neither A Nor B
Don't know?
2 of 61
Term
An engine is brought in for service with the customer complaint of
lack of power, high oil consumption, and repeated blown head
gaskets. Upon disassembly, all of the piston ring gaps are found to
be aligned and the head gasket is slightly burnt exhaust valve and
worn valve guide.
Give this one a try later!
The ring alignment The piston pin bore area
1/2 the stroke The govern idle speed
Don't know?
3 of 61
Term
,One quick and simple preliminary test for compression on a Briggs
& Stratton engine is to quickly rotate the engine counterclockwise
and observe the engine for a sharp rebound. Why must the engine
be
rotated counterclockwise as opposed to normal direction of
operation.
Give this one a try later!
As the cooling liquid temperature
decreases in the radiator, the cooler
1/2 the stroke
liquid will collect at the bottom
to be reused by the cooling
system.
Counterclockwise rotation on Technician b: to correct this
the power stroke problem, install a lighter rated
eliminates the compression spring and perform the normal
release system as it is
fixed speed governor adjustment
ineffective procedures
during this stroke
Don't know?
4 of 61
Term
The throttle plate in a Briggs & Stratton carburetor
Give this one a try later!
Increases or decreases the venturi
difference in air
pressure within the
, Controls the
ignition timing
for optimal
performance.
