CSLB LICENSE EXAM QUESTION AND CORRECT ANSWERS. LATEST UPDATE FOR 2025. PASS GUARANTEE, 100%

CSLB LICENSE EXAM QUESTION AND CORRECT ANSWERS.
LATEST UPDATE FOR 2025. PASS GUARANTEE, 100%




QUESTION: According to OSHA, shoring lumber shall be ____. - ANSWER-Select structural




QUESTION: cal/OSHA inspectors cannot, under most circumstances: - ANSWER-Enter a business outside
of normal business hours.




QUESTION: Every employer is required to post Material Safety Data Sheets: - ANSWER-on each job site




QUESTION: Handrails must be installed on all open side of a scaffold if workers are subject to falls of
_____ or more. - ANSWER-5'




QUESTION: When boom-type equipment is in operation, how close can it be to high voltage power
lines? - ANSWER-10'




QUESTION: How should you store oily mops or rags at the job site? - ANSWER-In a closed metal
container.

,QUESTION: If a Cal/OSHA inspector is coming to inspect a job site, it is best for the contractor to: -
ANSWER-personally walk through the job site and check the work.




QUESTION: In most cases, a crane cannot lift more than ____% of its capacity. Always consult the
manufacturer's operations manual and all applicable codes before using a crane and never attempt to
use one without being thoroughly trained and certified to operate the crane. - ANSWER-75%




QUESTION: In stable soil, a trench that is ____ or deeper requires shoring. - ANSWER-5 feet




QUESTION: On a construction site, flammable liquids can be found in ____ containers. - ANSWER-red




QUESTION: Prior to erecting scaffolding, it is best to consult the: - ANSWER-Construction Safety Orders




QUESTION: The rule of thumb that is used when digging a trench near another excavation is that the
horizontal distance from the trench to the excavation is no less than: - ANSWER-the depth of the trench




QUESTION: What agency requires Material Safety Data Sheets? - ANSWER-cal/OSHA




QUESTION: What is MSDS? - ANSWER-Material Safety Data Sheets




QUESTION: What is painted red on a construction site? - ANSWER-Flammable substances

,QUESTION: What is the danger of LP gas? - ANSWER-it collects near the floor




QUESTION: When boom-type equipment is in transit, how close can it be to high voltage? - ANSWER-6'




QUESTION: What is the minimum grade lumber which may be used for trench shoring? - ANSWER-#2
Douglas fir




QUESTION: What is the minimum safe distance required for people working near high voltage power
lines? - ANSWER-6'




QUESTION: When backing up a truck at a construction site you should: - ANSWER-sound the automatic
backup alarm or bells




QUESTION: When should you report an occupational injury on cal/OSHA Form 5020? - ANSWER-When
medical help beyond first aid is required.




QUESTION: When welding in confined spaces, the main danger is_____. - ANSWER-too many fumes




QUESTION: When welding, your gloves should be: - ANSWER-made of heavy leather hide

, QUESTION: When you are working on or near an electrical service panel, what should you assume? -
ANSWER-That it is unsafe




QUESTION: Where would you find the requirements for scaffolds? - ANSWER-cal/OSHA Construction
Safety orders




QUESTION: Which is the most toxic?

a. PVC solvent cements

b. concrete form oil

c. cement mortar

d. caulked joint materials - ANSWER-PVC solvent cements




QUESTION: Which of the following is not an acceptable procedure during crane operation?

a. more than one person signaling the operator

b. loads can be lifted over personnel

c. A and B

d. the crane operator's manual should be present - ANSWER-C. A and B




QUESTION: Which of the following is true about outdoor receptacles used for power tools and
equipment?

a. They must be isolated