PA safety inspection Exam 2025 UPDATE MOST
TESTED QUESTIONS WITH VERIFIED ANSWERS
GRADED A+ ASSURED SUCCESS
Practice questions for this set
Learn
Studied 7 terms
Nice work. You’re doing brilliantly.
Continue studying in Learn
Terms in this set (77)
The American Society of Mechanical Engineers Boiler
ASME Code
and Pressure Vessel Code
The American Society for Testing and Materials; Crash
ASTM
Dummies
The center of the critical area on the driver's side of
Acute Area of the the vehicle directly in the driver's normal line of vision;
Windshield 8 1/2 inches wide and 5 1/2 inches high; changes with
height of driver
, The pounds per square inch for which the container
was constructed, or if conditions have changed, the
Allowable Working
maximum pressure at specified temperatures
Pressure
permitted at the most recent inspection by a certified
inspector; usually deals with CNG
A change in the construction, design, or installation of
a container that affects the strength or safety of the
Alteration
system; must be of equal or greater strength as the
original
A lighting device mounted to provide illumination in
front of the vehicle and to supplement the upper
Auxiliary Driving Lamp beam of a standard headlamp system; it is not
intended for use alone or with the lower beam of a
standard headlamp system
A lamp used to provide illumination behind the
Back-Up Lamp vehicle and to provide a warning signal when the
vehicle is in reverse gear
The part of the tire made of steel wires wrapper or
Bead
reinforced by ply cords, that is shaped to fit the rim
A layer made of fabric or other material located
Belt
under the tread area
CGA The Compressed Gas Association
A lamp mounted on a multipurpose passenger
Cargo Lamp vehicle, truck or bus that provides illumination to load
or unload cargo
A person who holds a valid certification card issued
by the Bureau certifying that the person is qualified,
Certified Inspection
has passed all requirements to inspect specific
Mechanic
vehicles and holds a valid driver's license for the
correct class of vehicle
TESTED QUESTIONS WITH VERIFIED ANSWERS
GRADED A+ ASSURED SUCCESS
Practice questions for this set
Learn
Studied 7 terms
Nice work. You’re doing brilliantly.
Continue studying in Learn
Terms in this set (77)
The American Society of Mechanical Engineers Boiler
ASME Code
and Pressure Vessel Code
The American Society for Testing and Materials; Crash
ASTM
Dummies
The center of the critical area on the driver's side of
Acute Area of the the vehicle directly in the driver's normal line of vision;
Windshield 8 1/2 inches wide and 5 1/2 inches high; changes with
height of driver
, The pounds per square inch for which the container
was constructed, or if conditions have changed, the
Allowable Working
maximum pressure at specified temperatures
Pressure
permitted at the most recent inspection by a certified
inspector; usually deals with CNG
A change in the construction, design, or installation of
a container that affects the strength or safety of the
Alteration
system; must be of equal or greater strength as the
original
A lighting device mounted to provide illumination in
front of the vehicle and to supplement the upper
Auxiliary Driving Lamp beam of a standard headlamp system; it is not
intended for use alone or with the lower beam of a
standard headlamp system
A lamp used to provide illumination behind the
Back-Up Lamp vehicle and to provide a warning signal when the
vehicle is in reverse gear
The part of the tire made of steel wires wrapper or
Bead
reinforced by ply cords, that is shaped to fit the rim
A layer made of fabric or other material located
Belt
under the tread area
CGA The Compressed Gas Association
A lamp mounted on a multipurpose passenger
Cargo Lamp vehicle, truck or bus that provides illumination to load
or unload cargo
A person who holds a valid certification card issued
by the Bureau certifying that the person is qualified,
Certified Inspection
has passed all requirements to inspect specific
Mechanic
vehicles and holds a valid driver's license for the
correct class of vehicle
