1|Page
MSSC Quality Practices & Measurement
Exam Test Questions Correct Answers
Current Update (A+ Pass)
Which type of feature is parallel to the surface being dimensioned? - ✔✔Dimension line
The three standard views of an object are __________. - ✔✔Top, front, right side
Which type of lines are used to show the counterbored hole in the part? - ✔✔Hidden lines
The number of views in a drawing __________. - ✔✔Is the fewest number that shows all of the features
and dimensions
Which of the following steps is NOT used in the glass box method? - ✔✔Rotate object in glass box.
What type of drawing is shown? - ✔✔Multiview
The dimensions of raw material supplied by metal suppliers are described by the __________. - ✔✔Stock
size
Which of these requires a computer? - ✔✔CAD
An isometric drawing is a type of __________. - ✔✔Pictorial drawing
In the graphic shown, the two circles are __________. - ✔✔Concentric
Dimensions are used to specify the __________ and location of the features of an object. - ✔✔Size
What feature in the figure shown is a Chamfer? - ✔✔D
Katelyn Whitman© 2025, All Rights Reserved.
,2|Page
A __________ dimension is described in inches per foot. - ✔✔Shaft taper
What is the order of precedence of lines in a drawing? - ✔✔Object, Hidden, Center
Which of the following is not one of the six rules for dimensioning an object? - ✔✔Dimension hidden
lines
Engineers sometimes use a __________ to measure angles on a drawing. - ✔✔Protractor
What dimension is indicated in this graphic? - ✔✔Height
There are 60 minutes of arc in one __________. - ✔✔Degree
In manufacturing, a blueprint is also called what? - ✔✔A technical drawing
The distance across the flats of the hex head shown in the part drawing is __________ inches. - ✔✔2 ¼
The length of the part shown in the drawing is __________ inches. - ✔✔9 ¾
Which type best describes the line indicated in the graphic? - ✔✔Object Line
Which of the following bolts is a grade 2? - ✔✔A
The hole shown in the graphic is a __________ hole. - ✔✔Counterbore
What are the two types of assembly drawings? - ✔✔Exploded and basic
A sectional view __________. - ✔✔All of the above
Which of the following is not used to specify a threaded fastener? - ✔✔Minor diameter
Two types of threads are __________. - ✔✔Internal and external
In the assembly drawing shown, part 3 screws into part __________. - ✔✔4
Katelyn Whitman© 2025, All Rights Reserved.
, 3|Page
The material that will be used to create the gear is indicated in the part drawing's title block to be
__________. - ✔✔Cast iron
In a threaded fastener assembly what is designed to protect the threads? - ✔✔Shank
Manufacturing workers can use a calibrated torque wrench to __________. - ✔✔Measure the proper
amount of torque
The part of a drawing that indicates that the drawing has the most up to date information on it is
__________. - ✔✔Drawing revision level
What type hole is shown in the figure? - ✔✔Counterbored
The minor diameter of a screw thread is measured at the __________. - ✔✔Root of screw thread
Section lines in a sectional view are __________. - ✔✔All of the above
To establish on a drawing that 1/4 inch equals 1 inch, the designer would write __________. - ✔✔1/4=1
Metals treated by __________ processes become soft. - ✔✔Annealing
Where would you look in a title block to see if there has been changes? - ✔✔Revision number
Section lines on a blueprint indicate __________. - ✔✔A surface that has been cut
A screw with fine thread is represented on a drawing with what designation? - ✔✔UNF
What is the depth of the countersink in the image? - ✔✔0.12 inches
What is placed at the arrowheads of the cutting plane line to identify the cutting plane with the proper
sectional view? - ✔✔Capital letter
Assembly drawings rely on reference letters or numbers to __________. - ✔✔Identify the individual parts
Katelyn Whitman© 2025, All Rights Reserved.
MSSC Quality Practices & Measurement
Exam Test Questions Correct Answers
Current Update (A+ Pass)
Which type of feature is parallel to the surface being dimensioned? - ✔✔Dimension line
The three standard views of an object are __________. - ✔✔Top, front, right side
Which type of lines are used to show the counterbored hole in the part? - ✔✔Hidden lines
The number of views in a drawing __________. - ✔✔Is the fewest number that shows all of the features
and dimensions
Which of the following steps is NOT used in the glass box method? - ✔✔Rotate object in glass box.
What type of drawing is shown? - ✔✔Multiview
The dimensions of raw material supplied by metal suppliers are described by the __________. - ✔✔Stock
size
Which of these requires a computer? - ✔✔CAD
An isometric drawing is a type of __________. - ✔✔Pictorial drawing
In the graphic shown, the two circles are __________. - ✔✔Concentric
Dimensions are used to specify the __________ and location of the features of an object. - ✔✔Size
What feature in the figure shown is a Chamfer? - ✔✔D
Katelyn Whitman© 2025, All Rights Reserved.
,2|Page
A __________ dimension is described in inches per foot. - ✔✔Shaft taper
What is the order of precedence of lines in a drawing? - ✔✔Object, Hidden, Center
Which of the following is not one of the six rules for dimensioning an object? - ✔✔Dimension hidden
lines
Engineers sometimes use a __________ to measure angles on a drawing. - ✔✔Protractor
What dimension is indicated in this graphic? - ✔✔Height
There are 60 minutes of arc in one __________. - ✔✔Degree
In manufacturing, a blueprint is also called what? - ✔✔A technical drawing
The distance across the flats of the hex head shown in the part drawing is __________ inches. - ✔✔2 ¼
The length of the part shown in the drawing is __________ inches. - ✔✔9 ¾
Which type best describes the line indicated in the graphic? - ✔✔Object Line
Which of the following bolts is a grade 2? - ✔✔A
The hole shown in the graphic is a __________ hole. - ✔✔Counterbore
What are the two types of assembly drawings? - ✔✔Exploded and basic
A sectional view __________. - ✔✔All of the above
Which of the following is not used to specify a threaded fastener? - ✔✔Minor diameter
Two types of threads are __________. - ✔✔Internal and external
In the assembly drawing shown, part 3 screws into part __________. - ✔✔4
Katelyn Whitman© 2025, All Rights Reserved.
, 3|Page
The material that will be used to create the gear is indicated in the part drawing's title block to be
__________. - ✔✔Cast iron
In a threaded fastener assembly what is designed to protect the threads? - ✔✔Shank
Manufacturing workers can use a calibrated torque wrench to __________. - ✔✔Measure the proper
amount of torque
The part of a drawing that indicates that the drawing has the most up to date information on it is
__________. - ✔✔Drawing revision level
What type hole is shown in the figure? - ✔✔Counterbored
The minor diameter of a screw thread is measured at the __________. - ✔✔Root of screw thread
Section lines in a sectional view are __________. - ✔✔All of the above
To establish on a drawing that 1/4 inch equals 1 inch, the designer would write __________. - ✔✔1/4=1
Metals treated by __________ processes become soft. - ✔✔Annealing
Where would you look in a title block to see if there has been changes? - ✔✔Revision number
Section lines on a blueprint indicate __________. - ✔✔A surface that has been cut
A screw with fine thread is represented on a drawing with what designation? - ✔✔UNF
What is the depth of the countersink in the image? - ✔✔0.12 inches
What is placed at the arrowheads of the cutting plane line to identify the cutting plane with the proper
sectional view? - ✔✔Capital letter
Assembly drawings rely on reference letters or numbers to __________. - ✔✔Identify the individual parts
Katelyn Whitman© 2025, All Rights Reserved.
