NIMS MMS (NIMS STUDY GUIDE)
QUESTIONS WITH CORRECT
SOLUTIONS!!
1 of 60
Term
Oily rags and wipes are stored in a red fireproof can with a lid to
prevent
Give this one a try later!
fires through spontaneous
run out on work holding devices
combustion
, dial indicator and digital
height gage
oil from seeping on the
floor vernier caliper and
telescoping gage
Don't know?
2 of 60
Term
The best lubricant to prevent wear and increase cutting
efficiency for tapping common steels is
Give this one a try later!
tooling diameters and sizes mineral oil
sulfur based oil kerosene
Don't know?
3 of 60
Term
What is the allowance for a shaft measuring 1" dia. with an
RC6 sliding fit (in inches)?
Give this one a try later!
, -.6 -.003
-.103 -.97
Don't know?
4 of 60
Term
Sampling plans contribute to a quality control process by:
Give this one a try later!
providing an
acceptable conducting interviews with
representation of all production staff about their work
parts produced
ensuring that all defective collecting feedback from
parts are discarded customers about product
immediately quality
Don't know?
, 5 of 60
Term
When working on machinery producing flying chips, what is
the most important safety equipment?
Give this one a try later!
hard hat safety glasses
welding helmet goggles
Don't know?
6 of 60
Term
The acronym HMIS stands for:
Give this one a try later!
Hazardous
Department Of Transportation Materials
Information
System
What Are The Placard Colors Preventative Maintenance
And Meaning Schedule And Machine Manual
QUESTIONS WITH CORRECT
SOLUTIONS!!
1 of 60
Term
Oily rags and wipes are stored in a red fireproof can with a lid to
prevent
Give this one a try later!
fires through spontaneous
run out on work holding devices
combustion
, dial indicator and digital
height gage
oil from seeping on the
floor vernier caliper and
telescoping gage
Don't know?
2 of 60
Term
The best lubricant to prevent wear and increase cutting
efficiency for tapping common steels is
Give this one a try later!
tooling diameters and sizes mineral oil
sulfur based oil kerosene
Don't know?
3 of 60
Term
What is the allowance for a shaft measuring 1" dia. with an
RC6 sliding fit (in inches)?
Give this one a try later!
, -.6 -.003
-.103 -.97
Don't know?
4 of 60
Term
Sampling plans contribute to a quality control process by:
Give this one a try later!
providing an
acceptable conducting interviews with
representation of all production staff about their work
parts produced
ensuring that all defective collecting feedback from
parts are discarded customers about product
immediately quality
Don't know?
, 5 of 60
Term
When working on machinery producing flying chips, what is
the most important safety equipment?
Give this one a try later!
hard hat safety glasses
welding helmet goggles
Don't know?
6 of 60
Term
The acronym HMIS stands for:
Give this one a try later!
Hazardous
Department Of Transportation Materials
Information
System
What Are The Placard Colors Preventative Maintenance
And Meaning Schedule And Machine Manual
