ACCURATE REAL EXAM QUESTIONS WITH CORRECT DETAILED ANSWERS
( VERIFIED ANSWERS) /ALREADY GRADED A+
What is the Montreal Protocol? - ANSWER -Treaty among
nations designed to protect the stratospheric ozone layer
When was the CFC phase out date? - ANSWER -December 31,
1995
What personal protective equipment
should you wear when handling
refrigerants? - ANSWER -Safety glasses, Butyl-
lined protective gloves, Safety shoes\
What is the safest rating of a refrigerant according to the
ASHRAE scale? - ANSWER -A-1 is considered
the safest refrigerant while
B-3 is the least safe
.Why should oxygen or compressed air never be used to test
leak a system? - ANSWER -Oxygen or
,compressed air, when mixed with
refrigerants, can cause
an
explosion
When using nitrogen to charge a system, what piece of
equipment should it be
charged through and where should a relief valve be located? -
ANSWER -Charge through a pressure regulator (make sure the
nitrogen
cylinder has a regulator on it) and insert a
relief valve downstream line from the
pressure regulator
Where can you find the appropriate test pressures for a
system? - ANSWER -Data plate on the low-side
pressure
valve
What are the two conditions to be aware of in observing relief
valves? - ANSWER -NOT to be installed in
series and be replaced if corrosion build-up is
found within the body of a relief valve
, What can happen to refrigerants if they are
exposed to direct flame or other
excessive heat? - ANSWER -Change into
toxic materials like phosgene gas
Before welding, cutting or brazing a refrigerant line, what
should be done? - ANSWER -Evacuate all
refrigerant
What chemicals does the Montreal Protocol control? -
ANSWER -a. chlorofluorocarbons (CFCs), halons,
b. carbon tetrachloride
c. methyl chloroform
d. All the above
In case of a major refrigerant leak, what actions should be
taken? - ANSWER -Immediately vacate and
ventilate the area or use
Self Contained
Breathing
Apparatus
(SCBA).
What types of cylinders can be used for
recovery and how can you visually