NCCER BOILERMAKER TEST:
2024 Questions and Answers
GRADED A+ RESULTS
ASSURED!!
A
VI
TU
Advanced steam boilers can operate at temperatures
as high a s _____ degrees. - ANSWER 1,150
One way of identifying insulation that may
contain asbestos is through_____. - ANSWER testing by qualified person
IS
Supercritical boilers can operate at pressures
as high as_____psi. - ANSWER 4,500
M
The hazards associated with hot work performed
O
on areas coated with lead-based paint
are minimized in the workplace b y _____. - ANSWER performing an area survey
prior to performing
A
cutting or grinding operations
N
Grinding operations inside a boiler present
an explosion hazard due to _____. - ANSWER combustible gases
JP
The weight of an object to be lifted should not
exceed the_____of the lifting equipment. - ANSWER safe working load
The term that means asbestos insulation is
easily crumbled into fibers that become airborne
is _____. - ANSWER friability
One of the places on a boiler where asbestos
may be found is _______ . - ANSWER door seals
, Before entering a confined space, a worker
should_____. - ANSWER inspect the space's shoring and support
A boilermaker working at extreme heights
must follow safety precautions not only to
prevent falls but also to prevent causing ________ - ANSWER injury to personnel
working below from
falling objects
A
When welding with shielding gas, extra ventilation
VI
is needed due to the fact that the gas
used______. - ANSWER is heavier than air and collects in low areas
TU
When working at heights,_____must be
worn. - ANSWER a safety hamess
Suspended scaffolds are particularly useful
when working on_____. - ANSWER boiler interiors
IS
At the beginning of a shift, boilermakers are
normally given a _____. - ANSWER safety briefing
M
Cutting metals inside a boiler presents an
O
added hazard due to _____ . - ANSWER combustion residue fumes
A material that can maintain its strength at a high temperature is called _______. -
A
ANSWER Lagging
N
An insulating material that easily crumbles into fibers and may become airborne is said
to have
JP
the______characteristic. - ANSWER Friability
A buildup of solid combustion byproducts in a boiler is called _______. - ANSWER
Combustion Residue
Using braces to ensure integrity of a confined space is called _______ - ANSWER
Shoring
2024 Questions and Answers
GRADED A+ RESULTS
ASSURED!!
A
VI
TU
Advanced steam boilers can operate at temperatures
as high a s _____ degrees. - ANSWER 1,150
One way of identifying insulation that may
contain asbestos is through_____. - ANSWER testing by qualified person
IS
Supercritical boilers can operate at pressures
as high as_____psi. - ANSWER 4,500
M
The hazards associated with hot work performed
O
on areas coated with lead-based paint
are minimized in the workplace b y _____. - ANSWER performing an area survey
prior to performing
A
cutting or grinding operations
N
Grinding operations inside a boiler present
an explosion hazard due to _____. - ANSWER combustible gases
JP
The weight of an object to be lifted should not
exceed the_____of the lifting equipment. - ANSWER safe working load
The term that means asbestos insulation is
easily crumbled into fibers that become airborne
is _____. - ANSWER friability
One of the places on a boiler where asbestos
may be found is _______ . - ANSWER door seals
, Before entering a confined space, a worker
should_____. - ANSWER inspect the space's shoring and support
A boilermaker working at extreme heights
must follow safety precautions not only to
prevent falls but also to prevent causing ________ - ANSWER injury to personnel
working below from
falling objects
A
When welding with shielding gas, extra ventilation
VI
is needed due to the fact that the gas
used______. - ANSWER is heavier than air and collects in low areas
TU
When working at heights,_____must be
worn. - ANSWER a safety hamess
Suspended scaffolds are particularly useful
when working on_____. - ANSWER boiler interiors
IS
At the beginning of a shift, boilermakers are
normally given a _____. - ANSWER safety briefing
M
Cutting metals inside a boiler presents an
O
added hazard due to _____ . - ANSWER combustion residue fumes
A material that can maintain its strength at a high temperature is called _______. -
A
ANSWER Lagging
N
An insulating material that easily crumbles into fibers and may become airborne is said
to have
JP
the______characteristic. - ANSWER Friability
A buildup of solid combustion byproducts in a boiler is called _______. - ANSWER
Combustion Residue
Using braces to ensure integrity of a confined space is called _______ - ANSWER
Shoring
