BNSF STUDY
Which of the following is NOT a step in a job Safety Briefing? - ✔️✔️Verify job location
for the following week
should be:
Discussing the task at hand
Delegate and discuss life saving processes
Establish cues to pause the work
Which of the following is Not a form of personal protection? - ✔️✔️sunglasses
These are:
Hard Hat, Safety toed work boots
reflective vest
Good housekeeping and material storage can prevent injuries and includes the
following activies. - ✔️✔️All:
Keeping walk ways clear of hazards
Posting approperiate warning signs to identify hazards
Properly storing flammable and combstible liquids and gases
The purpose of a contractor safety action plan is? - ✔️✔️location specific plan for
carrying out elements of a company's safety management system
A contractor employer must ensure that its safety action plan(s) are: - ✔️✔️All:
maintained with each work group on BNSF railway property
Available withe the BNSF project Representative or Employee in charge
Uploaded to Contractor Orientation at www.bnsfcontractor.com
The 24 hour BNSF emergency number to call if an incident or injury occurs is 1-800-
832-5452 and is located in the first page of the contractor safety action plan and your
contractor orientation badge - ✔️✔️True
1. C
2. D
3. A - ✔️✔️
Latter - ✔️✔️Ascending/Descending - An exposure that exists when a person or an
object may be unexpectedly struck.
Door
, 1. C
2. B
3. D
4. LATTER/ DOOR. TRAIN/ BEAM - ✔️✔️Pinch Point - An exposure that exists when a
person or an object may be unexpectedly struck
Train - ✔️✔️Line of fire/ Release of Energy - An exposure that exists when a person or
an object may be unexpectedly struck
Beam - ✔️✔️Walking/ Path of Travel - An exposure that exists along a path of travel
that could cause a slip, Trip, or Fall
Copy of MSDS/SDS (s) must be maintained with your work group while on a BNSF
project. - ✔️✔️True
1. A
2. A
3. B
4. B
5. A - ✔️✔️
Slings or rigging should only be inspected weekly. - ✔️✔️False
During the hazardous Energy control / Lockout Tagout process, you must be sure
energy sources of all types are controlled. - ✔️✔️True
Personal fall arrest systems must be inspected before each use - ✔️✔️True
Which of the following may cause an arc flash event. - ✔️✔️All:
A Loose termination
Dropping a tool
accidental tourching
Which of the following are used in defining a space as confined space? - ✔️✔️All:
It is large enough and so configured that an employee can bodily enter and perform
assigned work.
It has limited or restricked means of entry
It is not designed or intended for continuous occupancy by personnel.
What is the minimum clearance distance used when the line voltage is unknown on
overhead power lines? - ✔️✔️45 feet
Which of the following is NOT a step in a job Safety Briefing? - ✔️✔️Verify job location
for the following week
should be:
Discussing the task at hand
Delegate and discuss life saving processes
Establish cues to pause the work
Which of the following is Not a form of personal protection? - ✔️✔️sunglasses
These are:
Hard Hat, Safety toed work boots
reflective vest
Good housekeeping and material storage can prevent injuries and includes the
following activies. - ✔️✔️All:
Keeping walk ways clear of hazards
Posting approperiate warning signs to identify hazards
Properly storing flammable and combstible liquids and gases
The purpose of a contractor safety action plan is? - ✔️✔️location specific plan for
carrying out elements of a company's safety management system
A contractor employer must ensure that its safety action plan(s) are: - ✔️✔️All:
maintained with each work group on BNSF railway property
Available withe the BNSF project Representative or Employee in charge
Uploaded to Contractor Orientation at www.bnsfcontractor.com
The 24 hour BNSF emergency number to call if an incident or injury occurs is 1-800-
832-5452 and is located in the first page of the contractor safety action plan and your
contractor orientation badge - ✔️✔️True
1. C
2. D
3. A - ✔️✔️
Latter - ✔️✔️Ascending/Descending - An exposure that exists when a person or an
object may be unexpectedly struck.
Door
, 1. C
2. B
3. D
4. LATTER/ DOOR. TRAIN/ BEAM - ✔️✔️Pinch Point - An exposure that exists when a
person or an object may be unexpectedly struck
Train - ✔️✔️Line of fire/ Release of Energy - An exposure that exists when a person or
an object may be unexpectedly struck
Beam - ✔️✔️Walking/ Path of Travel - An exposure that exists along a path of travel
that could cause a slip, Trip, or Fall
Copy of MSDS/SDS (s) must be maintained with your work group while on a BNSF
project. - ✔️✔️True
1. A
2. A
3. B
4. B
5. A - ✔️✔️
Slings or rigging should only be inspected weekly. - ✔️✔️False
During the hazardous Energy control / Lockout Tagout process, you must be sure
energy sources of all types are controlled. - ✔️✔️True
Personal fall arrest systems must be inspected before each use - ✔️✔️True
Which of the following may cause an arc flash event. - ✔️✔️All:
A Loose termination
Dropping a tool
accidental tourching
Which of the following are used in defining a space as confined space? - ✔️✔️All:
It is large enough and so configured that an employee can bodily enter and perform
assigned work.
It has limited or restricked means of entry
It is not designed or intended for continuous occupancy by personnel.
What is the minimum clearance distance used when the line voltage is unknown on
overhead power lines? - ✔️✔️45 feet
