Pumper Questions and Answers Already
Graded A
What is the primary function of a pumper in firefighting operations?
✔✔ To transport and deliver water to the fire scene.
How should a firefighter ensure the pumper's water tank is filled before leaving the station?
✔✔ Check the water level and refill if necessary.
What is the correct procedure for starting a pumper engine?
✔✔ Ensure all switches are in the correct position, engage the parking brake, and then start the
engine.
What should be checked before using a pumper to ensure its operational readiness?
✔✔ Engine oil levels, water tank levels, pump operations, and hose connections.
How do you determine the correct pressure for pumping water through the hoses?
✔✔ Refer to the pumper's specifications and adjust the pressure according to the situation.
1
,When using the pumper, what is the purpose of priming the pump?
✔✔ To remove air from the pump system and ensure water is flowing properly.
How should the pumper operator respond when the water pressure drops during a firefighting
operation?
✔✔ Check for any kinks in the hose, and if necessary, adjust the pump pressure.
What is the correct action to take when a pumper is approaching a fire scene and a hydrant is
located nearby?
✔✔ Position the pumper near the hydrant and connect the hoses to supply water.
What is the main purpose of the pumper’s foam system?
✔✔ To apply foam to the fire in order to suppress it more effectively.
What safety measure should always be followed when operating a pumper at the scene of a fire?
✔✔ Always wear full personal protective equipment (PPE), including helmet, gloves, and
turnout gear.
2
,What should the pumper operator do if they encounter a water supply issue at the fire scene?
✔✔ Immediately notify the incident commander and request an alternate water source.
How does a pumper contribute to effective fire suppression on a large fire?
✔✔ By delivering a consistent and controlled flow of water to the fire.
What is the most important consideration when setting up a pumper at the scene of a fire?
✔✔ Ensure the pumper is positioned in a location where it has clear access to a water supply and
a safe route for hose deployment.
When using a pumper to fight a fire, what action should be taken if the hose becomes kinked?
✔✔ Stop pumping, untangle the hose, and ensure the hose is straightened out before resuming.
How can a pumper operator help conserve water during firefighting operations?
✔✔ Use the minimum amount of water required to suppress the fire.
What action should be taken if a pumper’s pump is malfunctioning during an emergency?
3
, ✔✔ Immediately report the issue to the incident commander and attempt to switch to an alternate
water supply.
What is the purpose of the pumper’s pump panel?
✔✔ To control water flow, pressure, and the operation of various components of the pumper.
When operating a pumper, how should the operator handle a sudden surge of water pressure?
✔✔ Gradually reduce the pressure and monitor the hoses for any signs of damage.
What is the first step to take when arriving at a fire scene with a pumper?
✔✔ Ensure the pumper is positioned safely and assess the fire situation before deploying hoses.
How does the pumper operator ensure adequate water supply to the hoses during a fire?
✔✔ Monitor and adjust the pump pressure while ensuring a steady water supply.
What should be done if the water supply is interrupted during firefighting operations?
✔✔ Notify the incident commander and seek an alternate water supply or switch to the pumper's
internal tank.
4
Graded A
What is the primary function of a pumper in firefighting operations?
✔✔ To transport and deliver water to the fire scene.
How should a firefighter ensure the pumper's water tank is filled before leaving the station?
✔✔ Check the water level and refill if necessary.
What is the correct procedure for starting a pumper engine?
✔✔ Ensure all switches are in the correct position, engage the parking brake, and then start the
engine.
What should be checked before using a pumper to ensure its operational readiness?
✔✔ Engine oil levels, water tank levels, pump operations, and hose connections.
How do you determine the correct pressure for pumping water through the hoses?
✔✔ Refer to the pumper's specifications and adjust the pressure according to the situation.
1
,When using the pumper, what is the purpose of priming the pump?
✔✔ To remove air from the pump system and ensure water is flowing properly.
How should the pumper operator respond when the water pressure drops during a firefighting
operation?
✔✔ Check for any kinks in the hose, and if necessary, adjust the pump pressure.
What is the correct action to take when a pumper is approaching a fire scene and a hydrant is
located nearby?
✔✔ Position the pumper near the hydrant and connect the hoses to supply water.
What is the main purpose of the pumper’s foam system?
✔✔ To apply foam to the fire in order to suppress it more effectively.
What safety measure should always be followed when operating a pumper at the scene of a fire?
✔✔ Always wear full personal protective equipment (PPE), including helmet, gloves, and
turnout gear.
2
,What should the pumper operator do if they encounter a water supply issue at the fire scene?
✔✔ Immediately notify the incident commander and request an alternate water source.
How does a pumper contribute to effective fire suppression on a large fire?
✔✔ By delivering a consistent and controlled flow of water to the fire.
What is the most important consideration when setting up a pumper at the scene of a fire?
✔✔ Ensure the pumper is positioned in a location where it has clear access to a water supply and
a safe route for hose deployment.
When using a pumper to fight a fire, what action should be taken if the hose becomes kinked?
✔✔ Stop pumping, untangle the hose, and ensure the hose is straightened out before resuming.
How can a pumper operator help conserve water during firefighting operations?
✔✔ Use the minimum amount of water required to suppress the fire.
What action should be taken if a pumper’s pump is malfunctioning during an emergency?
3
, ✔✔ Immediately report the issue to the incident commander and attempt to switch to an alternate
water supply.
What is the purpose of the pumper’s pump panel?
✔✔ To control water flow, pressure, and the operation of various components of the pumper.
When operating a pumper, how should the operator handle a sudden surge of water pressure?
✔✔ Gradually reduce the pressure and monitor the hoses for any signs of damage.
What is the first step to take when arriving at a fire scene with a pumper?
✔✔ Ensure the pumper is positioned safely and assess the fire situation before deploying hoses.
How does the pumper operator ensure adequate water supply to the hoses during a fire?
✔✔ Monitor and adjust the pump pressure while ensuring a steady water supply.
What should be done if the water supply is interrupted during firefighting operations?
✔✔ Notify the incident commander and seek an alternate water supply or switch to the pumper's
internal tank.
4
