Osha 30 Construction stairways and
ladders
the standard ladder configuration is called single cleat - answer A true
The combined weight of people and equipment on a ladder is called the maximum
intended load - answer A true
Which ladder system allows for two way traffic up and down – answer B. double cleated
ladder
Stairs should be installed between 30 degrees and – answer c. 50 degrees
stairs ladders or ramps are required at an elevation break of ___ or more – answer B.
19 inches
each of the following is true of temporary stairs except – answer b. lighting is not
necessary
Heavy duty type 1a ladders have a ___ lbs weight limit – answer c. 300
rated load capacity refers to the total weight the ladder can sustain - answerA. True
common ladder materials include each except - answerc. plastic
inspect the location of a ladder for - answerd all of the above
Ladder must be inspected - answerD . all of the above
you must tag a damaged ladder do not use and remove it from the work area - answerA
true
Position the ladder using the - answerB 4-1
its generally ok to carry materials while going u or down a ladder - answerB. flase
under federal osha its ok to use the top two steps of a step ladder - answerB. false
the top section of an extension on a straight ladder should - answerB. not be used by
itself
Rungs of straight ladders don't need to be skid ressistant - answerB false
ladders
the standard ladder configuration is called single cleat - answer A true
The combined weight of people and equipment on a ladder is called the maximum
intended load - answer A true
Which ladder system allows for two way traffic up and down – answer B. double cleated
ladder
Stairs should be installed between 30 degrees and – answer c. 50 degrees
stairs ladders or ramps are required at an elevation break of ___ or more – answer B.
19 inches
each of the following is true of temporary stairs except – answer b. lighting is not
necessary
Heavy duty type 1a ladders have a ___ lbs weight limit – answer c. 300
rated load capacity refers to the total weight the ladder can sustain - answerA. True
common ladder materials include each except - answerc. plastic
inspect the location of a ladder for - answerd all of the above
Ladder must be inspected - answerD . all of the above
you must tag a damaged ladder do not use and remove it from the work area - answerA
true
Position the ladder using the - answerB 4-1
its generally ok to carry materials while going u or down a ladder - answerB. flase
under federal osha its ok to use the top two steps of a step ladder - answerB. false
the top section of an extension on a straight ladder should - answerB. not be used by
itself
Rungs of straight ladders don't need to be skid ressistant - answerB false
