MSSC Quality Exam Questions Correct
New Update (A+ Pass)
A scale typically found on a tape measure is ______ - Answers -✔✔ 1/16
Two systems of dimensional measurement used in manufacturing are the SI Metric
System and the _____ - Answers -✔✔ US Customary System
A common decimal-inch graduation is _____ - Answers -✔✔ 10ths, 50ths, 100ths
Resolution is sometimes called ____ - Answers -✔✔ discrimination
A common scale on a machinist's rule is _____ - Answers -✔✔ 150 mm
Dimensional measurement determines physical dimensions such as - Answers -✔✔
width, height, depth, and diameter
If the length of a part is 5.000 inches and the reading could be as much as 5.002 or as
little as 4.998, the accuracy is said to be ______ inches - Answers -✔✔ +/- 0.002
A common fractional-inch rule graduation is in _____ - Answers -✔✔ 32nds
A tape measure is used _____. - Answers -✔✔ In manufacturing and construction
industries
____ error occurs when the measurement we think we see is not the measurement
being indicated by the instrument - Answers -✔✔ Observational
The conversion of 3-3/8 inches to decimal inches is _____ - Answers -✔✔ 3.375
inches
The first step in dimensional measuring is to align the end of the rule where the zero is
located with one edge of the dimension you want to measure. The edge is called the
______ - Answers -✔✔ reference point
One inch is equal to - Answers -✔✔ 25.4 mm
In a standard multi-view drawing arrangement, the rear view is drawn to the _____ of
the left side view - Answers -✔✔ left
A _____ is a visual format used to communicate the information from engineers and
designers for creating, repairing, or troubleshooting parts and assemblies to the people
who perform these tasks. - Answers -✔✔ Print
New Update (A+ Pass)
A scale typically found on a tape measure is ______ - Answers -✔✔ 1/16
Two systems of dimensional measurement used in manufacturing are the SI Metric
System and the _____ - Answers -✔✔ US Customary System
A common decimal-inch graduation is _____ - Answers -✔✔ 10ths, 50ths, 100ths
Resolution is sometimes called ____ - Answers -✔✔ discrimination
A common scale on a machinist's rule is _____ - Answers -✔✔ 150 mm
Dimensional measurement determines physical dimensions such as - Answers -✔✔
width, height, depth, and diameter
If the length of a part is 5.000 inches and the reading could be as much as 5.002 or as
little as 4.998, the accuracy is said to be ______ inches - Answers -✔✔ +/- 0.002
A common fractional-inch rule graduation is in _____ - Answers -✔✔ 32nds
A tape measure is used _____. - Answers -✔✔ In manufacturing and construction
industries
____ error occurs when the measurement we think we see is not the measurement
being indicated by the instrument - Answers -✔✔ Observational
The conversion of 3-3/8 inches to decimal inches is _____ - Answers -✔✔ 3.375
inches
The first step in dimensional measuring is to align the end of the rule where the zero is
located with one edge of the dimension you want to measure. The edge is called the
______ - Answers -✔✔ reference point
One inch is equal to - Answers -✔✔ 25.4 mm
In a standard multi-view drawing arrangement, the rear view is drawn to the _____ of
the left side view - Answers -✔✔ left
A _____ is a visual format used to communicate the information from engineers and
designers for creating, repairing, or troubleshooting parts and assemblies to the people
who perform these tasks. - Answers -✔✔ Print
