1. before attempting to lift any materials? - ANS-make sure the load does not have
perusing nails wires or sharp edges
2. before attempting to lower an overhead load? - ANS-size up the load
3. how is the fall zone for a forklift operation best defined? - ANS-any area into which the
lifted materials could potentially fall
4. never stack or store materials? - ANS-on scaffolds or runways
5. one common way to tie a clove hitch is to use two? - ANS-Half hitches in opposite
directiond
6. the forklift hand signal for dog everything mean - ANS-to pause
7. the know shown in the figure above is a? - ANS-clove hitch
8. to prevent tip overs when driving a rough terrain forklift, keep the load? - ANS-carry the
load low
9. to transport a bottle of compressed gas, use a - ANS-Cylinder cart
10. to work with motorized material handling equipment, a worker must be? - ANS-trained,
certified and authorized
11. what device may have a rotating surface and/ or spikes on the table surface for a better
grip? - ANS-roller skids
12. what is the proper procedure to lift objects - ANS-bend knees and get a good grip, lift
with legs keep back straight and head up
13. when moving a material cart on an incline or decline surface, be sure the? - ANS-load
does not exceed the labeled weight capacity
14. when stacking bags of material that are the same width, step back and cross key the
bags? - ANS-every 10 bags high.
15. when using hand signals,always? - ANS-maintain eye contact with the operator