CWB Codes and Standards (Practice
Test Questions) & Answers 100%
Correct
The AWS D1.1 Structural Welding Code-Steel - ANSWER-includes welding procedure
and performance qualification requirements
The CSA is one organization accredited by the Standards Council of Canada for
developing standards related to joining and inspection. Name another one. - ANSWER-
Canadian General Standards Board (CGSB)
Which Canadian standard includes ferrous and non-ferrous materials with notch
toughness and includes aluminum piping systems? - ANSWER-CSA Z662
True or false: "Provisions for pre-qualified procedures are included in CSA W59.2 and
AWS D1.2 standards/Codes for fabricating aluminum and its alloys". - ANSWER-False
CSA S473 - ANSWER-includes a comprehensive fracture control plan.
Most standards are created by: - ANSWER-voluntary efforts
In Canada, shop inspections of pressure vessels are performed by: - ANSWER-an
inspector employed by the regulatory authority in the province of fabrication.
T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-2219. -
ANSWER-True
The CAN/CSA Standard N285.6 Series covers the qualification and welding
requirements for: - ANSWER-thin walled zirconium tubing
What are the three main categories of qualified personnel required by CSA W47.1 and
CSA W47.2? - ANSWER-Welding Engineer, Welding Supervisor, Welder
Which of the following codes/standards do not deal with fabrication, but include the
qualification of welding procedures and welding personnel? - ANSWER-ASME Section
IX
T/F - CAN/CSA S473 introduces a Fracture Control Plan. - ANSWER-True
Test Questions) & Answers 100%
Correct
The AWS D1.1 Structural Welding Code-Steel - ANSWER-includes welding procedure
and performance qualification requirements
The CSA is one organization accredited by the Standards Council of Canada for
developing standards related to joining and inspection. Name another one. - ANSWER-
Canadian General Standards Board (CGSB)
Which Canadian standard includes ferrous and non-ferrous materials with notch
toughness and includes aluminum piping systems? - ANSWER-CSA Z662
True or false: "Provisions for pre-qualified procedures are included in CSA W59.2 and
AWS D1.2 standards/Codes for fabricating aluminum and its alloys". - ANSWER-False
CSA S473 - ANSWER-includes a comprehensive fracture control plan.
Most standards are created by: - ANSWER-voluntary efforts
In Canada, shop inspections of pressure vessels are performed by: - ANSWER-an
inspector employed by the regulatory authority in the province of fabrication.
T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-2219. -
ANSWER-True
The CAN/CSA Standard N285.6 Series covers the qualification and welding
requirements for: - ANSWER-thin walled zirconium tubing
What are the three main categories of qualified personnel required by CSA W47.1 and
CSA W47.2? - ANSWER-Welding Engineer, Welding Supervisor, Welder
Which of the following codes/standards do not deal with fabrication, but include the
qualification of welding procedures and welding personnel? - ANSWER-ASME Section
IX
T/F - CAN/CSA S473 introduces a Fracture Control Plan. - ANSWER-True
