1|Page | © copyright 2024/2025 | Grade A+
forklift questions Questions and
Answers (100% Pass)
when an operator "feathers" the controls it means to
✓ the process of manipulating the hydraulic control valves to produce
smooth, flowing movements, no sudden starts and stops
it is acceptable for an operator to leave the controls to unload hoisted
material as long as he is in clear view
✓ false
when approaching a blind corner what should you do
✓ slow down, sound horn, feather the brake
when approaching a slope keep the forks
✓ keep the forks raised only enough to clear the surface
what type of steering should be used at high speeds
✓ small corrections are made, no sudden change of direction
when a load is placed on the forks where does the center of gravity move to
Master01 | October, 2024/2025 | Latest update
, 1|Page | © copyright 2024/2025 | Grade A+
✓ forward
the higher the load is lifted the forklifts capacity is (blank) and may cause the
forklift to (blank)
✓ lowered and tip over
when a forklift picks up a load on a slope its capacity is
✓ the vertical lifting capacity is greatly reduced
an operator may need hand signals from a co-worker if
✓ his view is obstructed
the weight of the load and scaffold or platform capacity should be
considered when
✓ placing a load upon the staging
if a hydraulic leak appears what should you do
✓ shut off the engine, contain the spill
if you need to restack a load what should you do before exiting the cab
Master01 | October, 2024/2025 | Latest update
forklift questions Questions and
Answers (100% Pass)
when an operator "feathers" the controls it means to
✓ the process of manipulating the hydraulic control valves to produce
smooth, flowing movements, no sudden starts and stops
it is acceptable for an operator to leave the controls to unload hoisted
material as long as he is in clear view
✓ false
when approaching a blind corner what should you do
✓ slow down, sound horn, feather the brake
when approaching a slope keep the forks
✓ keep the forks raised only enough to clear the surface
what type of steering should be used at high speeds
✓ small corrections are made, no sudden change of direction
when a load is placed on the forks where does the center of gravity move to
Master01 | October, 2024/2025 | Latest update
, 1|Page | © copyright 2024/2025 | Grade A+
✓ forward
the higher the load is lifted the forklifts capacity is (blank) and may cause the
forklift to (blank)
✓ lowered and tip over
when a forklift picks up a load on a slope its capacity is
✓ the vertical lifting capacity is greatly reduced
an operator may need hand signals from a co-worker if
✓ his view is obstructed
the weight of the load and scaffold or platform capacity should be
considered when
✓ placing a load upon the staging
if a hydraulic leak appears what should you do
✓ shut off the engine, contain the spill
if you need to restack a load what should you do before exiting the cab
Master01 | October, 2024/2025 | Latest update
