CERTIFIED PLAYGROUND SAFETY
INSPECTOR {CPSI} EXAM
QUESTIONS |GUARANTEED PASS
To be compliant with ASTM 1487, a designer or manufacturer of
playground equipment should - Accurate Answers✔✔✔ provide buyers
with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard
exists on - Accurate Answers✔✔✔ a partially bounded opening
3. Which of the following is correct regarding the impact-attenuation of
surfacing material - Accurate Answers✔✔✔ Critical height must equal
or exceed fall height
4. When evaluating the structural integrity of a support structure for a
swing that appears to be failing, a CPSI should - Accurate
Answers✔✔✔ hire a licensed professional engineer to certify the
integrity of the equipment
5. Manufacturers of playground equipment must: provide the
manufacturer's identification of the equipment - Accurate Answers✔✔✔
6. The majority of injuries associated with playground equipment result
from - Accurate Answers✔✔✔ falls to the surface on which the
equipment was located
, 7. An opening may present a common crush or shear hazard only if it -
Accurate Answers✔✔✔ grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting
requirements of - Accurate Answers✔✔✔ ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following is
correct - Accurate Answers✔✔✔ Signage may not prevent accidents but
may reduce liability
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing - Accurate
Answers✔✔✔ Type of surfacing and amount of use
11. When planning a playground for public use, the play equipment that
is chosen must - Accurate Answers✔✔✔ be appropriate for the age of
intended users
12. A spring rocker with seat height of 26" is about to be installed
adjacent to the side of a fully enclosed bucket swing set. The minimum
distance required between the swing set and the rocker is - Accurate
Answers✔✔✔ 108" or 9'
13. The Site History File for a playground should contains - Accurate
Answers✔✔✔ a comprehensive inventory of all equipment, a parts list,
maintenance, and inspection recommendations
INSPECTOR {CPSI} EXAM
QUESTIONS |GUARANTEED PASS
To be compliant with ASTM 1487, a designer or manufacturer of
playground equipment should - Accurate Answers✔✔✔ provide buyers
with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard
exists on - Accurate Answers✔✔✔ a partially bounded opening
3. Which of the following is correct regarding the impact-attenuation of
surfacing material - Accurate Answers✔✔✔ Critical height must equal
or exceed fall height
4. When evaluating the structural integrity of a support structure for a
swing that appears to be failing, a CPSI should - Accurate
Answers✔✔✔ hire a licensed professional engineer to certify the
integrity of the equipment
5. Manufacturers of playground equipment must: provide the
manufacturer's identification of the equipment - Accurate Answers✔✔✔
6. The majority of injuries associated with playground equipment result
from - Accurate Answers✔✔✔ falls to the surface on which the
equipment was located
, 7. An opening may present a common crush or shear hazard only if it -
Accurate Answers✔✔✔ grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting
requirements of - Accurate Answers✔✔✔ ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following is
correct - Accurate Answers✔✔✔ Signage may not prevent accidents but
may reduce liability
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing - Accurate
Answers✔✔✔ Type of surfacing and amount of use
11. When planning a playground for public use, the play equipment that
is chosen must - Accurate Answers✔✔✔ be appropriate for the age of
intended users
12. A spring rocker with seat height of 26" is about to be installed
adjacent to the side of a fully enclosed bucket swing set. The minimum
distance required between the swing set and the rocker is - Accurate
Answers✔✔✔ 108" or 9'
13. The Site History File for a playground should contains - Accurate
Answers✔✔✔ a comprehensive inventory of all equipment, a parts list,
maintenance, and inspection recommendations
