Answers
In which situation would an ESD strike potentially cause harm to the PC? -
ANSWERSwhen replacing a mechanical hard drive with an M.2 SSD
A person has started a new technical job. In which situation would ESD be an issue? -
ANSWERSwhen installing a processor
A technician is about to begin preventive maintenance on a company PC. In which
situation would ESD be an issue? - ANSWERSwhen installing a processor
Case 2: - ANSWERSwhen replacing a motherboard
Case 3: - ANSWERSWhen installing RAM
An instructor has given a student an assignment to assemble a PC. In which situation
should the student be aware that ESD is an issue? - ANSWERSwhen installing RAM
What two motherboard components control the system boot operations? (Choose two.)
- ANSWERSBIOS chip UEFI chip
A technician is upgrading an ATX motherboard with another ATX motherboard. Which
component might be affected by this and need to be upgraded and bought as an
additional purchase? - ANSWERSCPU
A customer has requested that a PC be built that will support eSATA. Which component
should be checked to be sure that this feature is supported? - ANSWERSchipset
Which memory module used to hold instructions for booting a PC and loading the OS,
but is still used on adapters even though the memory contents cannot be changed? -
ANSWERSROM
What is a characteristic of DDR SDRAM? - ANSWERSIt transfers data twice per clock
cycle compared to once per clock cycle for SDRAM.
What are two safety hazards when dealing with laser printers? (Choose two.) -
ANSWERShigh voltage hot components
Which component requires a technician to install screws externally through the PC
case? - ANSWERSpower supply
, A technician is installing an internal HDD. To which motherboard connector will the
technician connect the data cable? - ANSWERSSATA
Refer to the exhibit. A technician has been asked to install a video card. Which section
of the motherboard will the technician use to install the card? - ANSWERSSection D
When a PC is being assembled, what component is connected to the motherboard with
a SATA cable? - ANSWERSThe optical drive
A technician is troubleshooting a computer that is experiencing hardware failure
detected by the BIOS. What is one way this failure is indicated? - ANSWERSThe
computer emits a pattern of beeps indicating the failing device.
Which three features can be configured in the BIOS settings to secure a computer?
(Choose three.) - ANSWERSdrive encryption, TPM, passwords
What is the purpose of RAID adapters? - ANSWERSto connect multiple storage devices
for redundancy or speed
When a new motherboard is being installed, between which two components must
thermal compound be applied? (Choose two.) - ANSWERSCPU and heat sink
What is the purpose of a Safety Data Sheet? - ANSWERSto specify procedures for
dealing with potentially hazardous materials
Which negative environmental factor does cleaning the inside of a computer reduce? -
ANSWERSdust
What is a recommended procedure to follow when cleaning computer components? -
ANSWERSHold cans of compressed air upright while spraying.
On the production floor, a furniture plant has laptops for process monitoring and
reporting. The production floor environment is around 80 degrees Fahrenheit (27
degrees Celsius). The humidity level is fairly high around 70 percent. Fans are mounted
in the ceiling for air circulation. Wood dust is prevalent. Which condition is most likely to
adversely affect a laptop that is used in this environment? - ANSWERSThe dust
After a technician tests a theory of probable causes, what two actions should the
technician take if the testing did not identify an exact cause? (Choose two.) -
ANSWERSEstablish a new theory of probable causes, Document each test tried that
did not correct the problem.
What would happen if a PC that contains a power supply that does not automatically
adjust for input voltage is set to 230 volts and attaches to an outlet in the United States?
- ANSWERSThe PC would not turn on.