Dante Certification Level 2 (2nd Edition)
UPDATED Actual Exam Questions and
CORRECT Answers
The Dante clock leader election is an automatic process. However, you can manually
influence which device will win the election. What option would give a device the highest
priority in the election process? - CORRECT ANSWER- ✔✔Preferred Leader checked.
Suppose a Dante device has one channel and two transmit flows. Can it connect to three
different receiving devices? - CORRECT ANSWER- ✔✔Yes. Minimum recommended
latency could be as low as 0.5 msec.
Approximately how much bandwidth does a unicast audio flow use? (4-ch, 24-bit, 48kHz,
1msec latency) - CORRECT ANSWER- ✔✔6Mbps
Dante Controller can apply information in a Dante preset to a device of a different model. For
instance, if a 4-channel 70V amplifier is replaced with an 8-channel model, it could save the
IP settings, device name, as well as channel labels and subscriptions for the first four
channels. - CORRECT ANSWER- ✔✔True
When recalling a Dante Preset, you can choose to recall everything or limit the recall to
specific features and/or specific devices. - CORRECT ANSWER- ✔✔True
What happens if multiple devices have the Preferred Leader checkbox marked? - CORRECT
ANSWER- ✔✔Both will be elevated in the clock election process, only one of those two will
be come the clock leader.
When using redundant Dante networks, how do we configure the switches? - CORRECT
ANSWER- ✔✔The primary and secondary networks must remain in separate broadcast
domains (could be a VLAN) and each network must use separate subnets.
Suppose a Dante device that is chasing an external clock (like word clock or video sync).
What setting must be checked in Dante Controller? - CORRECT ANSWER- ✔✔In Dante
Controller, make sure the "External Clock" checkbox is marked for this device.
UPDATED Actual Exam Questions and
CORRECT Answers
The Dante clock leader election is an automatic process. However, you can manually
influence which device will win the election. What option would give a device the highest
priority in the election process? - CORRECT ANSWER- ✔✔Preferred Leader checked.
Suppose a Dante device has one channel and two transmit flows. Can it connect to three
different receiving devices? - CORRECT ANSWER- ✔✔Yes. Minimum recommended
latency could be as low as 0.5 msec.
Approximately how much bandwidth does a unicast audio flow use? (4-ch, 24-bit, 48kHz,
1msec latency) - CORRECT ANSWER- ✔✔6Mbps
Dante Controller can apply information in a Dante preset to a device of a different model. For
instance, if a 4-channel 70V amplifier is replaced with an 8-channel model, it could save the
IP settings, device name, as well as channel labels and subscriptions for the first four
channels. - CORRECT ANSWER- ✔✔True
When recalling a Dante Preset, you can choose to recall everything or limit the recall to
specific features and/or specific devices. - CORRECT ANSWER- ✔✔True
What happens if multiple devices have the Preferred Leader checkbox marked? - CORRECT
ANSWER- ✔✔Both will be elevated in the clock election process, only one of those two will
be come the clock leader.
When using redundant Dante networks, how do we configure the switches? - CORRECT
ANSWER- ✔✔The primary and secondary networks must remain in separate broadcast
domains (could be a VLAN) and each network must use separate subnets.
Suppose a Dante device that is chasing an external clock (like word clock or video sync).
What setting must be checked in Dante Controller? - CORRECT ANSWER- ✔✔In Dante
Controller, make sure the "External Clock" checkbox is marked for this device.
