MSSC SAFETY ASSESSMENT Correctly Solved [100% Correct]

MSSC SAFETY ASSESSMENT Correctly Solved [100% Correct] What is the primary goal of a safety program? a) To reduce insurance costs b) To ensure legal compliance c) To protect workers from hazards d) To meet company standards **Ans: c) To protect workers from hazards** Which of the following is a key element of a Hazard Communication Program? a) Regularly changing signs b) Employee training c) Limiting access to hazardous areas d) Weekly reporting to OSHA **Ans: b) Employee training** What is the recommended distance for storing flammable materials from ignition sources? a) 5 feet b) 10 feet c) 20 feet d) 30 feet 2 **Ans: c) 20 feet** When must personal protective equipment (PPE) be used? a) Only during emergencies b) Whenever a safety sign is posted c) When engineering controls cannot eliminate the hazard d) When it’s more convenient than other controls **Ans: c) When engineering controls cannot eliminate the hazard** The acronym OSHA stands for: a) Occupational Standards and Hazard Association b) Organizational Safety and Health Act c) Occupational Safety and Health Administration d) Operational Safety Hazard Administration **Ans: c) Occupational Safety and Health Administration** What is the first step in conducting a job hazard analysis (JHA)? a) Reviewing past incidents b) Selecting the job to be analyzed c) Identifying potential hazards d) Implementing safety controls **Ans: b) Selecting the job to be analyzed** 3 An eyewash station must be located within how many seconds of a potential chemical exposure? a) 10 seconds b) 15 seconds c) 30 seconds d) 60 seconds **Ans: b) 15 seconds** Which of the following is a type of engineering control? a) Using personal protective equipment (PPE) b) Implementing machine guards c) Providing safety training d) Conducting regular safety meetings **Ans: b) Implementing machine guards** Lockout/tagout (LOTO) procedures are used to: a) Prevent unauthorized entry into hazardous areas b) Ensure machines are properly cleaned c) Control hazardous energy during maintenance d) Secure tools when not in use **Ans: c) Control hazardous energy during maintenance** What is the purpose of Safety Data Sheets (SDS)? a) To document safety audits 4 b) To provide information on the safe use of chemicals c) To track employee injuries d) To provide inspection reports **Ans: b) To provide information on the safe use of chemicals** Hearing protection is required when noise levels reach: a) 70 decibels b) 85 decibels c) 100 decibels d) 120 decibels **Ans: b) 85 decibels** Which of the following is NOT a component of a fire triangle? a) Heat b) Oxygen c) Carbon dioxide d) Fuel **Ans: c) Carbon dioxide** What should you do if you find a chemical container without a label? a) Use it carefully b) Leave it and notify your supervisor c) Assume it’s safe 5 d) Dispose of it immediately **Ans: b) Leave it and notify your supervisor** Which type of fire extinguisher is used for electrical fires? a) Class A b) Class B c) Class C d) Class D **Ans: c) Class C** What is the first step when responding to an emergency? a) Assess the situation b) Call for help c) Begin first aid d) Evacuate the area **Ans: a) Assess the situation** A confined space is defined as: a) Any small work area b) A space large enough to enter but not designed for continuous occupancy c) An area with poor ventilation d) A room with hazardous chemicals **Ans: b) A space large enough to enter but not designed for continuous occupancy** 6 What does a yellow and black striped safety sign indicate?