ASE STYLE Questions and Correct Answers | Latest Update 2024/2025 | Graded A+

ASE STYLE Questions and Correct Answers | Latest Update 2024/2025 | Graded A+ Technician A says a pilot bearing is a bushing that supports the forward end of the transmission input shaft. Technician B says a pilot bearing is a bushing that reduces friction between the clutch fork and pressure plate. Who is right? - Answer -A only. Technician A says the clutch disc is bolted to the transmission input shaft. Technician B says the clutch disc is splined to the transmission input shaft. Who is right? - Answer -B only. Technician A says clutch disc torsion springs are used to fasten the clutch disc to the transmission input shaft. Technician B says clutch disc torsion springs help absorb some of the vibration produced by clutch engagement. Who is right? - Answer -B only. A car is brought into the shop with a worn clutch. Technician A tells the owner of the car that highway driving will wear out a clutch faster than city driving. Technician B tells the owner that city driving wears out a clutch faster than highway driving. Who is right? - Answer -B only. A clutch is being tested for slippage. Technician A says when performing this test, the emergency brake should be engaged. Technician B sayswhen testing a clutch for slippage, the car's transmission should be placed in high gear. Who is right? - Answer -Both A and B. An automobile's clutch has too much "free play." Technician A says this problem can cause clutch slippage. Technician B says this problem can cause clutch dragging. Who is right? - Answer -B only. While discussing the functions of the basic parts of a manual transmission, Technician A says the input shaft transfers rotating power out of the transmission to the drive shaft. Technician B says the input shaft is used to turn the gears in