Accu Check Post test Questions and Answer | Latest Update 2024/2025

Before running a patient test, you must be sure the test strip lot number on the test strip vial corresponds to the test strip lot number displayed in the ACCUCHEK Inform II meter. ~~> True T/F If "Quality Control is Due" or "QC Due Immediately" appears in the display, you should run controls and make sure that the results are in range before proceeding to do a patient test. ~~> TRUE T/F 2 | P a g e | © copyright 2024/2025 | Grade A+ Master01 | September, 2024/2025 | Latest update The ACCU-CHEK Inform II system cannot record operator or patient ID information. ~~> FALSE T/F Personal protective equipment must be worn when performing blood glucose or glucose control testing and when cleaning and disinfecting the ACCU-CHEK Inform II system. ~~> TRUE T/F The six-digit number on the meter screen needs to match the number on the test strip vial you are using. ~~> TRUE T/F 3 | P a g e | © copyright 2024/2025 | Grade A+ Master01 | September, 2024/2025 | Latest update The test strip is placed in the test strip slot with the yellow target area or test window facing up and the end with the gold bars inserted into the meter. ~~> TRUE T/F The test will start when the appropriate amount of sample is applied to the ACCU-CHEK Inform II test strip, about 0.6 m ~~> TRUE T/F Only capillary whole blood samples should be used when testing with the ACCU-CHEK Inform II meter and ACCU-CHEK Inform II test strips. ~~> FALSE