9/10/24, 4:29 PM CR-1/CR-1 Drywall and Acoustical Systems Flashcards | Quizlet
CR-1/CR-1 Drywall and Acoustical Systems
Jeremiah
.Practice questions for this set
Terms in this set (132)
When plastering, how far from the face can 18 inches
scaffolding be?
How should doors and window openings be Figured solid with no openings considered.
figured when estimating the square feet of a
room for drywall?
Max temperature allowed from a constant 125 degree F
heat source behind drywall?
1/7
, 9/10/24, 4:29 PM
Adhesives are used to install 4ft by 8ft sheet 0
of drywall to a wall with studs spaced at 16
inches O.C. How many field fasteners are
required?
What size of screw is used to attach RC-1 1-1/4 inch type W or S bugle head
resilient channels to wood joists?
Minimum screwable area of a metal stud 1-1/4 inches
used in gypsum drywall construction?
Describe type "X" drywall? It has fire resistant core additives
Recommended spacing, center to center, for 16 inches
1-1/4 inch drywall screws when attaching 5/8
inch gypsum board to studs spaced 24
inches on center without using adhesive?
Proper order for hanging drywall? Ceiling to walls
What type of gypsum board is Exterior gypsum ceiling board
recommended for soffit and patio ceiling?
Runners used to align and secure metal 10ft
studs to the floor and the ceiling are
available in a max standard length of?
When 5/8 inch drywall is fastened to 22 1 inch type S bugle head
gage steel framing, what screw should be
used?
Gypsum wall board covering used in Be used to protect the structural element from heat and fire.
structures is primarily to?
Which should NOT be used to smooth and 100 grit sandpaper
level joint compound ridges and
imperfections?
Control joints should be used in drywall 30 feet
partitions when the wall surface in any either
direction exceeds?
Which SHOULD be used for drywall finishing Trowel
in preparation for painting and wall
covering?
If an employee provides his/her own Employer
protective equipment, who is responsible for
its maintenance?
Which screw would you use to fasten 5/8 Type S-12
inch drywall to 16 gauge steel framing?
To fasten drywall to 18 gauge steel studs, Type S-12
what screws are used?
Which type of drywall could NOT be used Resistant LRI 100
where moisture is present?
When drywall panels span the flat grain of Float panels over these members with no fasteners.
wide dimensional lumbar such as a floor joist
and headers?
CR-1/CR-1 Drywall and Acoustical Systems
2/7
CR-1/CR-1 Drywall and Acoustical Systems
Jeremiah
.Practice questions for this set
Terms in this set (132)
When plastering, how far from the face can 18 inches
scaffolding be?
How should doors and window openings be Figured solid with no openings considered.
figured when estimating the square feet of a
room for drywall?
Max temperature allowed from a constant 125 degree F
heat source behind drywall?
1/7
, 9/10/24, 4:29 PM
Adhesives are used to install 4ft by 8ft sheet 0
of drywall to a wall with studs spaced at 16
inches O.C. How many field fasteners are
required?
What size of screw is used to attach RC-1 1-1/4 inch type W or S bugle head
resilient channels to wood joists?
Minimum screwable area of a metal stud 1-1/4 inches
used in gypsum drywall construction?
Describe type "X" drywall? It has fire resistant core additives
Recommended spacing, center to center, for 16 inches
1-1/4 inch drywall screws when attaching 5/8
inch gypsum board to studs spaced 24
inches on center without using adhesive?
Proper order for hanging drywall? Ceiling to walls
What type of gypsum board is Exterior gypsum ceiling board
recommended for soffit and patio ceiling?
Runners used to align and secure metal 10ft
studs to the floor and the ceiling are
available in a max standard length of?
When 5/8 inch drywall is fastened to 22 1 inch type S bugle head
gage steel framing, what screw should be
used?
Gypsum wall board covering used in Be used to protect the structural element from heat and fire.
structures is primarily to?
Which should NOT be used to smooth and 100 grit sandpaper
level joint compound ridges and
imperfections?
Control joints should be used in drywall 30 feet
partitions when the wall surface in any either
direction exceeds?
Which SHOULD be used for drywall finishing Trowel
in preparation for painting and wall
covering?
If an employee provides his/her own Employer
protective equipment, who is responsible for
its maintenance?
Which screw would you use to fasten 5/8 Type S-12
inch drywall to 16 gauge steel framing?
To fasten drywall to 18 gauge steel studs, Type S-12
what screws are used?
Which type of drywall could NOT be used Resistant LRI 100
where moisture is present?
When drywall panels span the flat grain of Float panels over these members with no fasteners.
wide dimensional lumbar such as a floor joist
and headers?
CR-1/CR-1 Drywall and Acoustical Systems
2/7
