OSHA-10 Module 3 Fall Protection
Covers located on roadways and vehicular aisles shall be capable of supporting ,
without failure, at least - answerTwice the maximum axle load of the largest vehicle
expected to cross over the cover.
Accidents involving falls are: - answerGenerally complex events that frequently involve
a number of factors
what is a fall Hazard - answerA fall hazard is anything at your worksite that could cause
you to lose your balance or lose bodily support and result in a fall
What the minimum height in general industry that OSHA requires fall protection -
answerFour feet or more
What the general height in martime that OSHA requires fall protection - answerFive feet
Whats the general height in construction that OSHA requires fall protection - answerSix
feet
Regardless of the fall distance fall protection must be provided when working over what.
- answerDangerous equipment and machinery
If you are working on a scaffold fall protection is required when working and what height
- answerTen feet
Holes including skylights must cover that are capable of covering what amount of weight
- answerAt least twice the weight of employees of, equipment and material that may be
imposed on the cover at anytime.
On a worksite who should inspect all scaffolding and when should they be inspected -
answerA competent person should inspect the scaffolds before every shift
Supporting Stanchions that must be flagged at not more than______ and intervals with -
answer6 feet and high visibility material
who should design the scaffolds and prepare its rigging - answerSomeone who has very
specific knowledge and training
When holes are used for the passage of materials, the hole shall have not have more
than how many removable guard rail sections - answertwo
Covers located on roadways and vehicular aisles shall be capable of supporting ,
without failure, at least - answerTwice the maximum axle load of the largest vehicle
expected to cross over the cover.
Accidents involving falls are: - answerGenerally complex events that frequently involve
a number of factors
what is a fall Hazard - answerA fall hazard is anything at your worksite that could cause
you to lose your balance or lose bodily support and result in a fall
What the minimum height in general industry that OSHA requires fall protection -
answerFour feet or more
What the general height in martime that OSHA requires fall protection - answerFive feet
Whats the general height in construction that OSHA requires fall protection - answerSix
feet
Regardless of the fall distance fall protection must be provided when working over what.
- answerDangerous equipment and machinery
If you are working on a scaffold fall protection is required when working and what height
- answerTen feet
Holes including skylights must cover that are capable of covering what amount of weight
- answerAt least twice the weight of employees of, equipment and material that may be
imposed on the cover at anytime.
On a worksite who should inspect all scaffolding and when should they be inspected -
answerA competent person should inspect the scaffolds before every shift
Supporting Stanchions that must be flagged at not more than______ and intervals with -
answer6 feet and high visibility material
who should design the scaffolds and prepare its rigging - answerSomeone who has very
specific knowledge and training
When holes are used for the passage of materials, the hole shall have not have more
than how many removable guard rail sections - answertwo
