BPI-1200 Test
2.0 General requirements - main purpose - correct answer ✔Obtain relevant
operational information to supplement asset-based data.
What document does the the BPI-1200 parallel? - correct answer ✔The
standard parallels a ANSI/BSR BPI-1100-T-201X
2.0 General requirements - what is Annex B - correct answer ✔Sample of
homeowner/occupant questionnaire
3.4 Health and safety related requirements - correct answer ✔A citizens
guide to radon, US EPA
3.5 BPI Auditor as electrician - correct answer ✔The auditor shall limit any
electrical recommendations to the identification of knob and tube wiring and
other visual observations such as frayed or exposed wiring.
3.5 BPI Auditor if trained as electrical technician - correct answer ✔May limit
any electrical recommendations for which they have been trained
4.0 disclosure and ethics - correct answer ✔The auditor shall disclose any
current or potential conflicts of interest of the auditor to the customer
5.0 cost benefit analysis - correct answer ✔As part of the evaluation process
shall conform to the requirements of ANSI/BSR BPI-1100-T-201X Home
energy auditing standard, section 5
,6.0 prioritizing recommendations - correct answer ✔Shall conform to the
requirements of ANSI/BSR BPI-1100 T-201X, section 6
7.0 Combustion Appliance & Fuel Distribution System Inspection - correct
answer ✔Shall include inspection of combustion appliances and fuel
distribution systems for safety problems.
7.1 Gas Leaks, and/or actionable CO Levels - correct answer ✔Identify and
communicate situations that may require health and safety remediation items
such as:
7.2.1 CGD = - correct answer ✔Combustion Gas Detector
7.2.2.1 Must be intrinsically safe - correct answer ✔CGD will not cause a
spark.
7.2.2.2 Must have an adjustable tick rate - correct answer ✔Does not
necessarily identify hazardous thresholds
7.2.2.3 LEL = - correct answer ✔Lower Explosive Limit, is below .5%/ Air
Volume
7.2.2.4 CGD Must be calibrated when, how much - correct answer ✔At least
annually, or per manufactures recommendations
7.2.2.5 CGD shall be labeled with calibration sticker noting what - correct
answer ✔At a minimum the date of last calibration
,7.2.2.6 CGD shall have the ability to zero ambient conditions to track leak
locations given - correct answer ✔Is prone to false positives from high
humidity
7.2.4 Equipment/instrument used to detect incomplete combustion within
ambient air - correct answer ✔A Carbon Monoxide Detector (CO)
7.2.4.2 What is the CO instrument sensitivity required - correct answer ✔0 to
2000 PPM CO
7.2.4.3 CO Detector should have a resolution of < or = - correct answer ✔1
PPM
7.2.4.4 CO Detector should have an accuracy of +/- - correct answer ✔5
PPM
7.2.4.5 CO Detector must be calibrated when, how much - correct answer
✔CO Detector is calibrated annually, or per manufactures recommendations
7.2.4.6 After calibration what minimal amt. of information should appear on the
sticker - correct answer ✔The date of last calibration
7.2.4.7 CO Detector can be used for personal protection - correct answer
✔False, unless stated by manufacturer
7.2.5.1 Auditor shall wear a CO Detector of the type - correct answer
✔Approved by the manufacturer for personal protection
, 7.2.5.2 Auditor shall operate &react to a CO Detector - correct answer
✔During an audit, by creating safe working conditions
7.2.5.6 = - correct answer ✔Additional Equipment Required for
Depressurization Tests
7.2.6.1 Smoke pencils are the only piece of equipment need - correct answer
✔False
7.2.6.2 Manometer - how many - correct answer ✔One or more are suitable
having an accuracy of 0.1 Pa, and a resolution of +/- 0.2 Pa or better.
7.3 safe entry and working conditions associated with indoor air quality -
correct answer ✔Indoor air environment is found to be safe for their work can
be undertaken.
7.3.1 CGD, Personal CO Monitors - how to calibrate - correct answer
✔Calibrate outside the building away from any combustion outlets or
automobile traffic areas, and in accordance with manufacturers instructions
7.3.2.1 went to vacate the home during an audit - correct answer ✔If at any
time out of your smells combustible fuel gas occupants shall be notified to
leave the house
7.3.2.2 CO shall be sampled and what is safe level - correct answer ✔At
least one location of each floor. If carbon monoxide concentration exceed
10% of the LEL documents and auditor shall leave the house
2.0 General requirements - main purpose - correct answer ✔Obtain relevant
operational information to supplement asset-based data.
What document does the the BPI-1200 parallel? - correct answer ✔The
standard parallels a ANSI/BSR BPI-1100-T-201X
2.0 General requirements - what is Annex B - correct answer ✔Sample of
homeowner/occupant questionnaire
3.4 Health and safety related requirements - correct answer ✔A citizens
guide to radon, US EPA
3.5 BPI Auditor as electrician - correct answer ✔The auditor shall limit any
electrical recommendations to the identification of knob and tube wiring and
other visual observations such as frayed or exposed wiring.
3.5 BPI Auditor if trained as electrical technician - correct answer ✔May limit
any electrical recommendations for which they have been trained
4.0 disclosure and ethics - correct answer ✔The auditor shall disclose any
current or potential conflicts of interest of the auditor to the customer
5.0 cost benefit analysis - correct answer ✔As part of the evaluation process
shall conform to the requirements of ANSI/BSR BPI-1100-T-201X Home
energy auditing standard, section 5
,6.0 prioritizing recommendations - correct answer ✔Shall conform to the
requirements of ANSI/BSR BPI-1100 T-201X, section 6
7.0 Combustion Appliance & Fuel Distribution System Inspection - correct
answer ✔Shall include inspection of combustion appliances and fuel
distribution systems for safety problems.
7.1 Gas Leaks, and/or actionable CO Levels - correct answer ✔Identify and
communicate situations that may require health and safety remediation items
such as:
7.2.1 CGD = - correct answer ✔Combustion Gas Detector
7.2.2.1 Must be intrinsically safe - correct answer ✔CGD will not cause a
spark.
7.2.2.2 Must have an adjustable tick rate - correct answer ✔Does not
necessarily identify hazardous thresholds
7.2.2.3 LEL = - correct answer ✔Lower Explosive Limit, is below .5%/ Air
Volume
7.2.2.4 CGD Must be calibrated when, how much - correct answer ✔At least
annually, or per manufactures recommendations
7.2.2.5 CGD shall be labeled with calibration sticker noting what - correct
answer ✔At a minimum the date of last calibration
,7.2.2.6 CGD shall have the ability to zero ambient conditions to track leak
locations given - correct answer ✔Is prone to false positives from high
humidity
7.2.4 Equipment/instrument used to detect incomplete combustion within
ambient air - correct answer ✔A Carbon Monoxide Detector (CO)
7.2.4.2 What is the CO instrument sensitivity required - correct answer ✔0 to
2000 PPM CO
7.2.4.3 CO Detector should have a resolution of < or = - correct answer ✔1
PPM
7.2.4.4 CO Detector should have an accuracy of +/- - correct answer ✔5
PPM
7.2.4.5 CO Detector must be calibrated when, how much - correct answer
✔CO Detector is calibrated annually, or per manufactures recommendations
7.2.4.6 After calibration what minimal amt. of information should appear on the
sticker - correct answer ✔The date of last calibration
7.2.4.7 CO Detector can be used for personal protection - correct answer
✔False, unless stated by manufacturer
7.2.5.1 Auditor shall wear a CO Detector of the type - correct answer
✔Approved by the manufacturer for personal protection
, 7.2.5.2 Auditor shall operate &react to a CO Detector - correct answer
✔During an audit, by creating safe working conditions
7.2.5.6 = - correct answer ✔Additional Equipment Required for
Depressurization Tests
7.2.6.1 Smoke pencils are the only piece of equipment need - correct answer
✔False
7.2.6.2 Manometer - how many - correct answer ✔One or more are suitable
having an accuracy of 0.1 Pa, and a resolution of +/- 0.2 Pa or better.
7.3 safe entry and working conditions associated with indoor air quality -
correct answer ✔Indoor air environment is found to be safe for their work can
be undertaken.
7.3.1 CGD, Personal CO Monitors - how to calibrate - correct answer
✔Calibrate outside the building away from any combustion outlets or
automobile traffic areas, and in accordance with manufacturers instructions
7.3.2.1 went to vacate the home during an audit - correct answer ✔If at any
time out of your smells combustible fuel gas occupants shall be notified to
leave the house
7.3.2.2 CO shall be sampled and what is safe level - correct answer ✔At
least one location of each floor. If carbon monoxide concentration exceed
10% of the LEL documents and auditor shall leave the house
