NTN FIRETEAM STUDY SET | LATEST 2024/25 |
ACTUAL QUESTIONS AND ANSWERS | RATED
A+ GUARANTEED PASS
What do you use to tighten a bolt - -------CORRECT ANSWER---------socket wrench
What shape is a drillbit used for metal - -------CORRECT ANSWER---------sleek shape, not pointed, no
pertruding edges for operations at high speed to go through hard metal or sometimes wood
what shape drillbit is hand operated for drilling wood - -------CORRECT ANSWER---------the tip is a
threaded point, pertruding edges to cut through soft wood.
what shape drillbit is used from ceramics/masonry - -------CORRECT ANSWER---------squared off tip bit
small gear vs big gear, what turns faster? - -------CORRECT ANSWER---------Big gear
When installing Bolt w/ washer and nut, what side faces you? - -------CORRECT ANSWER---------Threaded
end goes away from body to prevent hazard
What tool is used to cut bolts? - -------CORRECT ANSWER---------Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do you do if there is unmelted material? - -------CORRECT ANSWER--------
-Stop, call mechanic
Mechanical Brick Factory: If you want more material from the start of the assembly, what do you do? - --
-----CORRECT ANSWER---------Adjust amount released by Hopper, DONT adjust speed of belt
, Mechanical Brick Factory: If the first grinder is stuck, what do you suspect? - -------CORRECT ANSWER-----
----There is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - -------CORRECT ANSWER---------You put it in
reverse manually
Mechanical Brick Factory: How do you remove a molding station arm? - -------CORRECT ANSWER---------1.
Loosen middle nut
2. then remove end nut
Mechanical Brick Factory: If water is pouring over the edge, what do you suspect is wrong? - -------
CORRECT ANSWER---------Green Filter CLOG
Mechanical Brick Factory: Water tank is rising quickly, how do you fix it? - -------CORRECT ANSWER---------
Reduce amount of fresh water
Mechanical Brick Factory: What purpose does the shake motion have on the washing tray? - -------
CORRECT ANSWER---------Shaking spins material to ensure all sides of material get washed
Mechanical Brick Factory: If there is a Gear valve that needs to be turned on and off, what way do you
turn it? - -------CORRECT ANSWER---------righty - closee (CW)
lefty - open (CCW)
Mechanical Brick Factory: What is the purpose of a gasket/washer - -------CORRECT ANSWER---------
distributes pressure, reduce chance of loosening, seals opening
Mechanical electrical question: what happens in a CIRCUIT when you turn on a light switch to turn lights
on? - -------CORRECT ANSWER---------Switched ON means the circuit closes, which routes power to its
purpose.
Switched off means the circuit is open, meaning no route for electricity to travel.
ACTUAL QUESTIONS AND ANSWERS | RATED
A+ GUARANTEED PASS
What do you use to tighten a bolt - -------CORRECT ANSWER---------socket wrench
What shape is a drillbit used for metal - -------CORRECT ANSWER---------sleek shape, not pointed, no
pertruding edges for operations at high speed to go through hard metal or sometimes wood
what shape drillbit is hand operated for drilling wood - -------CORRECT ANSWER---------the tip is a
threaded point, pertruding edges to cut through soft wood.
what shape drillbit is used from ceramics/masonry - -------CORRECT ANSWER---------squared off tip bit
small gear vs big gear, what turns faster? - -------CORRECT ANSWER---------Big gear
When installing Bolt w/ washer and nut, what side faces you? - -------CORRECT ANSWER---------Threaded
end goes away from body to prevent hazard
What tool is used to cut bolts? - -------CORRECT ANSWER---------Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do you do if there is unmelted material? - -------CORRECT ANSWER--------
-Stop, call mechanic
Mechanical Brick Factory: If you want more material from the start of the assembly, what do you do? - --
-----CORRECT ANSWER---------Adjust amount released by Hopper, DONT adjust speed of belt
, Mechanical Brick Factory: If the first grinder is stuck, what do you suspect? - -------CORRECT ANSWER-----
----There is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - -------CORRECT ANSWER---------You put it in
reverse manually
Mechanical Brick Factory: How do you remove a molding station arm? - -------CORRECT ANSWER---------1.
Loosen middle nut
2. then remove end nut
Mechanical Brick Factory: If water is pouring over the edge, what do you suspect is wrong? - -------
CORRECT ANSWER---------Green Filter CLOG
Mechanical Brick Factory: Water tank is rising quickly, how do you fix it? - -------CORRECT ANSWER---------
Reduce amount of fresh water
Mechanical Brick Factory: What purpose does the shake motion have on the washing tray? - -------
CORRECT ANSWER---------Shaking spins material to ensure all sides of material get washed
Mechanical Brick Factory: If there is a Gear valve that needs to be turned on and off, what way do you
turn it? - -------CORRECT ANSWER---------righty - closee (CW)
lefty - open (CCW)
Mechanical Brick Factory: What is the purpose of a gasket/washer - -------CORRECT ANSWER---------
distributes pressure, reduce chance of loosening, seals opening
Mechanical electrical question: what happens in a CIRCUIT when you turn on a light switch to turn lights
on? - -------CORRECT ANSWER---------Switched ON means the circuit closes, which routes power to its
purpose.
Switched off means the circuit is open, meaning no route for electricity to travel.
