UH-60M FDDCP Real Exam With 100%
Correct Answers
The tail rotor produces approximately _____% of total lift - ANSWER-2.5
What type of rotor system does the UH-60M have? - ANSWER-fully articulated
You must be at ____ KIAS in order to maintain altitude hold modes - ANSWER-50
What are the two modes that you can set while being on the ground? - ANSWER-ALTP
and HDG
What does an ILS DECL do? - ANSWER-slow to 70 KIAS by 200' AGL on glideslope
What does a HVR DECL do? - ANSWER-slow from 60 KIAS to a hover
The Go Around button on the cyclic is _______ only - ANSWER-engage
When below 50 KIAS, the trim beeper on the collective changes what? - ANSWER-
heading
The steering cues are processed/commanded by what components? - ANSWER-FCCs
What are the components of the Flight Director Set? - ANSWER-Independent FCC
FD/DCP
Two MFDs
Sensors
Go Around button
Remote Standby switch
Correct Answers
The tail rotor produces approximately _____% of total lift - ANSWER-2.5
What type of rotor system does the UH-60M have? - ANSWER-fully articulated
You must be at ____ KIAS in order to maintain altitude hold modes - ANSWER-50
What are the two modes that you can set while being on the ground? - ANSWER-ALTP
and HDG
What does an ILS DECL do? - ANSWER-slow to 70 KIAS by 200' AGL on glideslope
What does a HVR DECL do? - ANSWER-slow from 60 KIAS to a hover
The Go Around button on the cyclic is _______ only - ANSWER-engage
When below 50 KIAS, the trim beeper on the collective changes what? - ANSWER-
heading
The steering cues are processed/commanded by what components? - ANSWER-FCCs
What are the components of the Flight Director Set? - ANSWER-Independent FCC
FD/DCP
Two MFDs
Sensors
Go Around button
Remote Standby switch
