Tennessee
Comprehensive Driver
License Manual
Questions and Complete
Solutions Graded A+
Denning [Date] [Course title]
, 5 Required Vehicle Conditions - Answer: 1.) Check around outside of vehicle for small children, pets or
other obstruction.
2.)Check the condition of vehicle (windows, lights, body damage, condition of tires and potential fluid
leaks).
3.) Enter the vehicle, place the key in the ignition and lock the doors.
4.) Identify the location and purpose of all switches, gauges and pedals.
5.) Know the location of the following controls even if there is no need to use them at the moment:
-Horn, turn signals, emergency/four-way flashers, headlights (on/off and dimmer switch), windshield
wipers and washer controls, parking brake and release lever, air conditioner/heater/defroster controls,
and gearshift location (and clutch if manual transmission).
Proper Distance from Steering Wheel and Foot Pedals - Answer: -The pedals must be easily reachable
-Have good clear vision through windshield, each side window and all mirrors
-Your foot should be about 10 to 12 inches back from the steering wheel with or without an air bag.
-Do not move the seat so far forward or extend the steering column to a point where you cannot easily
steer.
-The top of the steering wheel should be no higher than the top of the shoulder.
Mirror Adjustments - Answer: 1.) Adjust mirrors properly. Remember all three of the rear view mirrors
must be adjusted so the widest possible view is given. Also, keep blind spots to a minimum.
-Adjust mirrors after the seat is adjusted correctly.
2.) Outside mirrors should be adjusted to reduce blind spots and provide maximum visibility.
3.) After mirror adjustments, if you lean lightly backward and see more than a glimpse of the rear
corners of the vehicle in your outside mirrors, adjust them outward.
4.) To make sure mirrors are in the correct position, let a car pass you on the left. As it passes out of view
in the inside mirror you should see its front bumper in the outside left (driver side) mirror.
5.) Before driving with these updated mirror settings, see how the work while your vehicle is parked. For
example, you can parallel park along a street, then see how passing vehicles move through your mirrors
and peripheral vision. This can help you become oriented to the new settings before heading out into
traffic.
6.)Remember, even properly positioned mirrors cannot eliminate all blind spots. To reduce risk, make a
final check to the sides before attempting any lateral moves. Even with properly adjusted mirrors,
always turn your head and check blind spots when you want to turn or change lanes.
Comprehensive Driver
License Manual
Questions and Complete
Solutions Graded A+
Denning [Date] [Course title]
, 5 Required Vehicle Conditions - Answer: 1.) Check around outside of vehicle for small children, pets or
other obstruction.
2.)Check the condition of vehicle (windows, lights, body damage, condition of tires and potential fluid
leaks).
3.) Enter the vehicle, place the key in the ignition and lock the doors.
4.) Identify the location and purpose of all switches, gauges and pedals.
5.) Know the location of the following controls even if there is no need to use them at the moment:
-Horn, turn signals, emergency/four-way flashers, headlights (on/off and dimmer switch), windshield
wipers and washer controls, parking brake and release lever, air conditioner/heater/defroster controls,
and gearshift location (and clutch if manual transmission).
Proper Distance from Steering Wheel and Foot Pedals - Answer: -The pedals must be easily reachable
-Have good clear vision through windshield, each side window and all mirrors
-Your foot should be about 10 to 12 inches back from the steering wheel with or without an air bag.
-Do not move the seat so far forward or extend the steering column to a point where you cannot easily
steer.
-The top of the steering wheel should be no higher than the top of the shoulder.
Mirror Adjustments - Answer: 1.) Adjust mirrors properly. Remember all three of the rear view mirrors
must be adjusted so the widest possible view is given. Also, keep blind spots to a minimum.
-Adjust mirrors after the seat is adjusted correctly.
2.) Outside mirrors should be adjusted to reduce blind spots and provide maximum visibility.
3.) After mirror adjustments, if you lean lightly backward and see more than a glimpse of the rear
corners of the vehicle in your outside mirrors, adjust them outward.
4.) To make sure mirrors are in the correct position, let a car pass you on the left. As it passes out of view
in the inside mirror you should see its front bumper in the outside left (driver side) mirror.
5.) Before driving with these updated mirror settings, see how the work while your vehicle is parked. For
example, you can parallel park along a street, then see how passing vehicles move through your mirrors
and peripheral vision. This can help you become oriented to the new settings before heading out into
traffic.
6.)Remember, even properly positioned mirrors cannot eliminate all blind spots. To reduce risk, make a
final check to the sides before attempting any lateral moves. Even with properly adjusted mirrors,
always turn your head and check blind spots when you want to turn or change lanes.
