Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 4 out of 32 pages
Exam (elaborations)

IFSTA 7 EXAM QUESTION BANK, QUESTIONS WITH COMPLETE SOLUTIONS (100% VERIFIED)

Document preview thumbnail
Preview 4 out of 32 pages

IFSTA 7 EXAM QUESTION BANK, QUESTIONS WITH COMPLETE SOLUTIONS (100% VERIFIED) IFSTA 7 EXAM QUESTION BANK, QUESTIONS WITH COMPLETE SOLUTIONS (100% VERIFIED) A compartment is any: - Answer open space with no complete fire barrier dividing it. A portable fire extinguisher must be labeled with the: - Answer letters and/or symbols that designate its class rating. An extinguishing agent, such as dry chemical or Halon-replacement agent, terminates the combustion reaction by: - Answer interfering with the chemical chain reaction. Before entering the building or fire area, the firefighter who is assigned to the nozzle of the attack hose should: - Answer open the nozzle fully to check for adequate flow. Class A portable fire extinguishers are rated from 1-A through 40-A based upon the amount of water and: - Answer duration and range of discharge used in extinguishing test fires Class K fires involve: - Answer cooking oils Class K rated extinguishers work because of _____, which converts fatty acids into a soapy film. - Answer saponification During overhaul, prying tools can be used to: - Answer remove baseboards and window frames. During the _____ stage of fire development, the three elements of the fire triangle come together and the combustion process begins. - Answer incipient Extinguish any fire near the _____ first when attacking a vehicle fire - Answer occupants Fires develop through four stages: incipient, growth, _____, and decay. - Answer fully developed Heat that is radiated to the insulating air layer between PPE and your body: - Answer can cause heat stress and failure of the PPE. How does a compartment fire affect pressure in and around gases in the compartment? - Answer Heat from a fire increases the pressure of the surrounding gases. How would a fire containing plastics be classified? - Answer Class A Hydrogen cyanide (HCN) is a product of combustion that: - Answer targets the brain after being inhaled, ingested, or absorbed into the body. If a firefighter aims a solid or straight stream at the ceiling so that water will rain down and extinguish the burning item, he or she is using a(an): - Answer indirect attack If a firefighter aims a solid stream at an item that is on fire and applies water until the item is no longer burning, he or she is using a(an): - Answer direct attack In a compartment fire, smoke flashover indicators include rapidly increasing volume, turbulence, optical density, and: - Answer darkening color In a ventilation-limited compartment fire that has a large volume of flammable gases, opening a door or window could result in: - Answer backdraft In the fire environment, convection usually involves the transfer of heat through: - Answer the movement of hot smoke and fire gases Materials that burn at normal oxygen levels will burn more intensely in _____ atmospheres. - Answer oxygen-enriched Observed from the exterior, a high neutral plane may indicate that the fire is in the early stages of development, or could indicate: - Answer a fire above your level. Overhaul operations include: - Answer searching for hidden fires Portable fire extinguishers are classified according to the: - Answer type of fire they are designed to extinguish. Sawdust ignites more easily than a log because the sawdust has a higher: - Answer surface-to-mass ratio The flow path of a structure fire is comprised of two regions: the ambient air flow in and the: - Answer hot exhaust flow out The minimum temperature at which a fuel in the air must be heated in order to start self sustained combustion is known as the: - Answer autoignition temperature (AIT). The transfer of heat through and between solids is known as: - Answer conduction Trash container fires are likely to be fought using Class A foam or: - Answer a master stream What occurs when a mixture of fuel and oxygen encounters an external heat source with sufficient heat or thermal energy to start the combustion reaction? - Answer smoke explosion What should the attack team do if they open the door to a structure and observe a low neutral plane and turbulent smoke? - Answer Apply water to the hot gas layer, but stay outside the structure What will establish new flow paths between the fire compartment and exterior vents of the building? - Answer Firefighters advancing a hoseline through an open door or ventilating windows to make entry into a building What will occur if firefighters begin an attack on a ventilation-limited structure fire with ventilation alone? - Answer The fire's heat release rate and spread will progressively increase as additional vents are made.

Content preview

IFSTA 7 EXAM QUESTION BANK,
QUESTIONS WITH COMPLETE
SOLUTIONS (100% VERIFIED)

, IFSTA 7 EXAM QUESTION BANK,
QUESTIONS WITH COMPLETE
SOLUTIONS (100% VERIFIED)
A compartment is any: - Answer ✓✓open space with no complete fire barrier dividing it.

A portable fire extinguisher must be labeled with the: - Answer ✓✓letters and/or
symbols that designate its class rating.

An extinguishing agent, such as dry chemical or Halon-replacement agent, terminates
the combustion reaction by: - Answer ✓✓interfering with the chemical chain reaction.

Before entering the building or fire area, the firefighter who is assigned to the nozzle of
the attack hose should: - Answer ✓✓open the nozzle fully to check for adequate flow.

Class A portable fire extinguishers are rated from 1-A through 40-A based upon the
amount of water and: - Answer ✓✓duration and range of discharge used in
extinguishing test fires

Class K fires involve: - Answer ✓✓cooking oils

Class K rated extinguishers work because of _____, which converts fatty acids into a
soapy film. - Answer ✓✓saponification

During overhaul, prying tools can be used to: - Answer ✓✓remove baseboards and
window frames.

During the _____ stage of fire development, the three elements of the fire triangle come
together and the combustion process begins. - Answer ✓✓incipient

Extinguish any fire near the _____ first when attacking a vehicle fire - Answer ✓✓
occupants

Fires develop through four stages: incipient, growth, _____, and decay. - Answer ✓✓
fully developed

Heat that is radiated to the insulating air layer between PPE and your body: - Answer ✓
✓can cause heat stress and failure of the PPE.

How does a compartment fire affect pressure in and around gases in the compartment?
- Answer ✓✓Heat from a fire increases the pressure of the surrounding gases.

,How would a fire containing plastics be classified? - Answer ✓✓Class A

Hydrogen cyanide (HCN) is a product of combustion that: - Answer ✓✓targets the
brain after being inhaled, ingested, or absorbed into the body.

If a firefighter aims a solid or straight stream at the ceiling so that water will rain down
and extinguish the burning item, he or she is using a(an): - Answer ✓✓indirect attack

If a firefighter aims a solid stream at an item that is on fire and applies water until the
item is no longer burning, he or she is using a(an): - Answer ✓✓direct attack

In a compartment fire, smoke flashover indicators include rapidly increasing volume,
turbulence, optical density, and: - Answer ✓✓darkening color

In a ventilation-limited compartment fire that has a large volume of flammable gases,
opening a door or window could result in: - Answer ✓✓backdraft

In the fire environment, convection usually involves the transfer of heat through: -
Answer ✓✓the movement of hot smoke and fire gases

Materials that burn at normal oxygen levels will burn more intensely in _____
atmospheres. - Answer ✓✓oxygen-enriched

Observed from the exterior, a high neutral plane may indicate that the fire is in the early
stages of development, or could indicate: - Answer ✓✓a fire above your level.

Overhaul operations include: - Answer ✓✓searching for hidden fires

Portable fire extinguishers are classified according to the: - Answer ✓✓type of fire they
are designed to extinguish.

Sawdust ignites more easily than a log because the sawdust has a higher: - Answer ✓
✓surface-to-mass ratio

The flow path of a structure fire is comprised of two regions: the ambient air flow in and
the: - Answer ✓✓hot exhaust flow out

The minimum temperature at which a fuel in the air must be heated in order to start self-
sustained combustion is known as the: - Answer ✓✓autoignition temperature (AIT).

The transfer of heat through and between solids is known as: - Answer ✓✓conduction

Trash container fires are likely to be fought using Class A foam or: - Answer ✓✓a
master stream

, What occurs when a mixture of fuel and oxygen encounters an external heat source
with sufficient heat or thermal energy to start the combustion reaction? - Answer ✓✓
smoke explosion

What should the attack team do if they open the door to a structure and observe a low
neutral plane and turbulent smoke? - Answer ✓✓Apply water to the hot gas layer, but
stay outside the structure

What will establish new flow paths between the fire compartment and exterior vents of
the building? - Answer ✓✓Firefighters advancing a hoseline through an open door or
ventilating windows to make entry into a building

What will occur if firefighters begin an attack on a ventilation-limited structure fire with
ventilation alone? - Answer ✓✓The fire's heat release rate and spread will
progressively increase as additional vents are made.

When a firefighter controls doors and windows during fire attack, it is an example of: -
Answer ✓✓oxygen exclusion

When a shed or other unattached structure is on fire, the primary objective is to: -
Answer ✓✓protect exposures

When a substance changes from one type of matter into another, such as two or more
substances combining to form compounds, the substance undergoes a: - Answer ✓✓
chemical reaction

When an extinguishing agent is determined to be safe and effective for use on
combustible metals, it will: - Answer ✓✓include application instructions on the
faceplate.

When attacking fire in stacked and piled materials, _____, then apply water or Class A
foam until extinguished. - Answer ✓✓use hooks or pike poles to break apart material

When firefighters apply water to the hot gas layer in a compartment, it will: - Answer ✓
✓reduce the radiant heat flux from the upper layer.

When performing a transitional attack, a _____ stream may be the best choice because
it will not upset the thermal layering as much as other stream patterns. - Answer ✓✓
straight

When solid fuels are heated, they begin to _____ and release fuel gases and vapors. -
Answer ✓✓pyrolize

Document information

Uploaded on
August 14, 2024
Number of pages
32
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$13.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
QuizGuider82
3.6
(19)
Sold
110
Followers
92
Items
2495
Last sold
2 months ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions