INDIANA FIRE FIGHTER MANDATORY TEST 2024:
306 REAL EXAM QUESTIONS WITH CORRECT
ANSWERS| GRADED A+
The PASS will activate in what two modes? Right ANS>> Manual & motion-activation
What are some contaminates that can get on our PPE? Right ANS>> Carcinogens,
Hydrocarbons,Blood-borne pathogens
The steel shank in turnout boots offers protection to what part of the foot? Right ANS>>
Bottom
When should a full inspection of your PPE take place? Right ANS>> After every alarm,
Aftercleaning, Prior to cleaning
While doffing . Right ANS>> Perform a quick inspection of any component
you feelyou might have damaged or contaminated
The hood is to worn under the SCBA facepiece. Right ANS>> False
NFPA covers Structural PPE. Right ANS>> 1971
The three layers of the pants & coat ensemble are the heat-resistant layer, the moister barrier,
and the . Right ANS>> Thermal liner
The drag rescue device (DRD) in the turnout coat is designed for .
Right ANS>> Pulling a firefighter to safety on the floor or ground
,A signal that your gear is superheated is the . Right ANS>> Off-gassing
your PPEexhibits
When donning PPE . Right ANS>> Don your hood prior to your coat
The drag rescue device (DRD) is suitable to attach a rope system for lowering a fallen
firefighter. Right ANS>> False
What level of hazmat protection does structural PPE provide? Right ANS>> Level D
Which of the following are the three layers of Structural PPE? Right ANS>> Outer Shell,
Moisturebarrier, Thermal barrier
What is the highest level of Hazmat PPE available? Right ANS>> Level A
Helmet face shields, or flip-downs, provide what level of eye protection? Right ANS>>
Secondary
When removing superheated gear, one step is to . Right ANS>> Open your
coat aswide as possible and roll the coat and SCBA out and off your shoulders.
Most bunker boots are placed in pants for quick and efficient donning. Right ANS>> True
Wildland & brush gear is the same as structural PPE. Right ANS>> False
When worn correctly, your offers the best protection against harm from the forces
and elements. Right ANS>> PPE
Thermal Protective Performance for Structural PPE measures . Right
ANS>> Theamount of heat transfer from one layer of the garment to another.
, What type on gear is designed for use in high angle, trench, or collapse rescue situations?
Right ANS>> Technical Rescue PPE
NFPA requires all PPE to be formally inspected, cleaned, and repaired, if needed, a minimum
of times a year to prevent the buildup of contaminates. Right ANS>> Two
Before stowing your PPE ---- whether in locker, bag, or compartment on apparatus ------
. Right ANS>> Make sure all components are completely dry
The chinstrap must be worn at all times, regardless of how the helmet is fitted to the head.
Right ANS>> True
When performing pick-head axe maintenance, ......................................................Right ANS>>
Do
not over sharpen
When performing maintenance on bolt cutters, ................................................... Right ANS>>
Wipe
entire tool with light oil.
When performing maintenance on a flat-head axe, ...................................... Right ANS>>
Remove all
paint from the axe head.
When using a chain saw to ventilate a roof, you should ...................................Right ANS>>
Plunge
the saw only a few inches into the material,
Bring saw to full RPM's before you plunge into the material,
Hold the saw in an almost vertical position.
Reciprocating saws are generally used by firefighters for .................................Right ANS>>
Vehicle
and machinery extrication.
306 REAL EXAM QUESTIONS WITH CORRECT
ANSWERS| GRADED A+
The PASS will activate in what two modes? Right ANS>> Manual & motion-activation
What are some contaminates that can get on our PPE? Right ANS>> Carcinogens,
Hydrocarbons,Blood-borne pathogens
The steel shank in turnout boots offers protection to what part of the foot? Right ANS>>
Bottom
When should a full inspection of your PPE take place? Right ANS>> After every alarm,
Aftercleaning, Prior to cleaning
While doffing . Right ANS>> Perform a quick inspection of any component
you feelyou might have damaged or contaminated
The hood is to worn under the SCBA facepiece. Right ANS>> False
NFPA covers Structural PPE. Right ANS>> 1971
The three layers of the pants & coat ensemble are the heat-resistant layer, the moister barrier,
and the . Right ANS>> Thermal liner
The drag rescue device (DRD) in the turnout coat is designed for .
Right ANS>> Pulling a firefighter to safety on the floor or ground
,A signal that your gear is superheated is the . Right ANS>> Off-gassing
your PPEexhibits
When donning PPE . Right ANS>> Don your hood prior to your coat
The drag rescue device (DRD) is suitable to attach a rope system for lowering a fallen
firefighter. Right ANS>> False
What level of hazmat protection does structural PPE provide? Right ANS>> Level D
Which of the following are the three layers of Structural PPE? Right ANS>> Outer Shell,
Moisturebarrier, Thermal barrier
What is the highest level of Hazmat PPE available? Right ANS>> Level A
Helmet face shields, or flip-downs, provide what level of eye protection? Right ANS>>
Secondary
When removing superheated gear, one step is to . Right ANS>> Open your
coat aswide as possible and roll the coat and SCBA out and off your shoulders.
Most bunker boots are placed in pants for quick and efficient donning. Right ANS>> True
Wildland & brush gear is the same as structural PPE. Right ANS>> False
When worn correctly, your offers the best protection against harm from the forces
and elements. Right ANS>> PPE
Thermal Protective Performance for Structural PPE measures . Right
ANS>> Theamount of heat transfer from one layer of the garment to another.
, What type on gear is designed for use in high angle, trench, or collapse rescue situations?
Right ANS>> Technical Rescue PPE
NFPA requires all PPE to be formally inspected, cleaned, and repaired, if needed, a minimum
of times a year to prevent the buildup of contaminates. Right ANS>> Two
Before stowing your PPE ---- whether in locker, bag, or compartment on apparatus ------
. Right ANS>> Make sure all components are completely dry
The chinstrap must be worn at all times, regardless of how the helmet is fitted to the head.
Right ANS>> True
When performing pick-head axe maintenance, ......................................................Right ANS>>
Do
not over sharpen
When performing maintenance on bolt cutters, ................................................... Right ANS>>
Wipe
entire tool with light oil.
When performing maintenance on a flat-head axe, ...................................... Right ANS>>
Remove all
paint from the axe head.
When using a chain saw to ventilate a roof, you should ...................................Right ANS>>
Plunge
the saw only a few inches into the material,
Bring saw to full RPM's before you plunge into the material,
Hold the saw in an almost vertical position.
Reciprocating saws are generally used by firefighters for .................................Right ANS>>
Vehicle
and machinery extrication.
