Material Handling Verified Solutions
1. Before you use it, you should ✔️Inspect it.
2. In materials-handling jargon, the quantity of materials that can be transported at one time is called
✔️a load.
3. When using a material cart on an incline, you must make sure ✔️the load does not exceed the
labeled weight capacity.
4. When using hand signals, you must always ✔️keep eye contact with the operator.
5. Before you can use motorized materials-handling equipment, you must be ✔️trained, certified, and
authorized.
6. Before lifting materials, you should look for ✔️protruding nails, or sharp edges.
7. To lower the center of gravity of a load, ✔️you should put the heaviest things on the bottom.
8. The people and materials in an elevator are considered to be ✔️a load.
9. A device with a rotating table and/or spikes on the table is a ✔️roller skid.
10. For moving heavy loads on a smooth surface, use an ✔️industrial forklift.
11. What is the diameter of the fall zone of a forklift? ✔️Twice the height of the object being lifted.
12. A non-motorized materials-handling device that can be either a lever, screw, or hydraulic is a
✔️jack.
1. Before you use it, you should ✔️Inspect it.
2. In materials-handling jargon, the quantity of materials that can be transported at one time is called
✔️a load.
3. When using a material cart on an incline, you must make sure ✔️the load does not exceed the
labeled weight capacity.
4. When using hand signals, you must always ✔️keep eye contact with the operator.
5. Before you can use motorized materials-handling equipment, you must be ✔️trained, certified, and
authorized.
6. Before lifting materials, you should look for ✔️protruding nails, or sharp edges.
7. To lower the center of gravity of a load, ✔️you should put the heaviest things on the bottom.
8. The people and materials in an elevator are considered to be ✔️a load.
9. A device with a rotating table and/or spikes on the table is a ✔️roller skid.
10. For moving heavy loads on a smooth surface, use an ✔️industrial forklift.
11. What is the diameter of the fall zone of a forklift? ✔️Twice the height of the object being lifted.
12. A non-motorized materials-handling device that can be either a lever, screw, or hydraulic is a
✔️jack.
