MLR ASE Test Questions & Answers 2024/2025

MLR ASE Test Questions & Answers 2024/2025 Both A and B - ANSWERSTechnician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? A only - ANSWERSThe tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that directional tires are rotated in a criss-cross pattern. Who is right? Safely exit the building - ANSWERSWhen a shop fire cannot be immediately contained, the best thing to do is warn others in the area, and: 300 amps for 15 seconds - ANSWERSA fully charged battery rated at 600 CCA, the ambient temperature is 70 degrees which of these current and time periods should be used? B only - ANSWERSA vehicle's halogen headlamp bulbs are being replaced. Technician A says the glass part of the bulb can only be handled with bare hands. Technician B says the headlamp may need to be removed. Who is right? 0.728 - ANSWERSOn a Metric Micrometer upper sleeve reading 5.0mm with lower sleeve reading 0.50mm and a thimble reading of 0.01mm what is the overall reading? A only - ANSWERSThe fuel filter on a fuel-injected vehicle is being replaced. Tech A says the fuel pressure should be relieved before removing the filter. Tech B says that the arrow on the fuel filter should point towards the fuel tank. Who is right? The brake pedal feels low and spongy - ANSWERSWhich of these is an indication of air in the brake hydraulic system? Anaerobic - ANSWERSWhich of these cures in the absence of air?