ASE MLR QUESTIONS WITH COMPLETE SOLUTIONS!!

Tech observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? (1) - Answer-Both A and B (1) The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that the directional tires are rotated in a criss-cross pattern. Who is right? (2) - Answer-Tech A (2) When a shop fire cannot be immediately contained, the best thing to do is warn others in the area, and: - Answer-Safely exit the building A fully charged battery rated at 600CCA, the ambient temperature is 70 degrees. What method should be used to diagnose? Which of these current in time periods should be used? - Answer-150A for 30 seconds A vehicle's halogen headlamp bulbs are being replaced. Tech A says that the glass portion of the bulb can be handled with bare hands. Tech B says the headlamp assembly may need to be removed to replace the bulb. (5) - Answer-B only (5) On a metric micrometer upper sleeve reading 5.0mm with lower sleeve reading 0.50mm and a thimble reading of 0.01mm what is the overall reading? - Answer-0.728 The fuel filter on a fuel-injected vehicle is being replaced. Tech A says the fuel pressure should be relieved before removing the filter. Tech B says that the arrow on the fuel filter should point towards the fuel tank. Who is right? (7) - Answer-Tech A (7)