BICSI ITSMM Exam Questions With 100% Verified Answers

BICSI ITSMM Exam Questions With 100% Verified Answers What is inductace? - answer1) The property of an electrical force field built around a conductor when current flows through it. 2) The resistance to change in current. What is impedance? - answerThe total opposition (resistance and reactance [capacitance and inductance]) that a circuit, cable or component offers to the flow of alternating current (ac) at a given frequency. It is measured in ohms. What is hearing range for humans? - answer20 Hz- 20,000 Hz What is modal dispersion? - answerA characteristic of transmission in an optical fiber that results from different lengths of the light paths taken by the many modes of light as they travel down the fiber from source to receiver. Also called modal distortion. What is chromatic dispersion? - answerA result of the phenomenon that the velocity of propagation in a medium is frequency dependent, which causes the frequency components of a pulse to lose phase coherence as it propagates (transmitted pulse will spread out as it propagates) What is a code? - answer"A rule or set of rules intended to ensure safety during the installation and use of materials, components, fixtures, systems, premises, and related subjects." Codes typically are invoked and enforced through government regulation. A code ensures the: -Practical safeguarding of persons and property from hazards. -Quality of construction What is a standard? - answerIs an accepted collection of requirements and recommendations for the defining, construction, evaluation, application or comparison of materials, equipment, products and services. Also to ensure a minimum level of acceptable performance. What is a regulation? - answeris an authoritative rule that controls or governs behavior leading to uniformity. What is SCS? - answerStructured Cabling System What is MC (CD)? - answerBuilding or campus serving cross connect in the ER for connecting entrance cabling, backbone cabling, and equipment cabling. Main cross connect/ campus distributor What is IC (BD)? - answerBuilding-serving cross-connect points located between the MC (CD) and HC (FD) in interbuilding backbone cabling. Intermediate cross connect/ building distributor What is HC (FD)? - answerFloor-serving location for the cross connection of horizontal cabling to other cabling and equipment. Horizontal cross connect/ floor distributor A first level backbone consists of: - answercabling that is installed between an MC (CD) and an IC (BD) or a horizontal cross-connect (HC [floor distributor (FD)]). A second level backbone consists of: - answeris a cable that is installed between an IC (BD) and an HC (FD). The color....Orange - answerDemarcation Point The color....Green - answerNetwork Connections (network, auxiliary equipment) The color....Purple - answerCommon equipment (connections to PBX, mainframe computer, LAN, multiplexer) The color....White - answerFirst level backbone (termination of building backbone cable connecting MC [CD] to ICs [BDs]) The color....Gray - answerSecond level Backbone (termination of building backbone cable connecting ICs [BDs] to HCs [FDs]) The color....Blue - answerHorizontal cable ( horizontal connections to telecommunications outlet/connectors, formerly referred to as "station cable" The color....Brown - answerInterbuilding backbone (campus cable terminations) * Brown takes precedence over White or Gray for interbuilding runs