OSHA Cranes Exam Questions And Answers (Verified And Updated)

OSHA Cranes Exam Questions And Answers (Verified And Updated) Multi-Employer Citation Policy cites the following employers - answerControlling, exposing, creating, correcting Crane types covered: - answerCrawler, barge, mobile, straddle, industrial, tower Crane types excluded: - answerConcrete pumps, backhoes, forklifts, drilling rigs, helicopters A crane is basically: - answera piece of equipment with a hoist line that goes up and down A signal person must be: - answerQualified and competent in the application of the types of signals used, have basic knowledge of crane operation and limitations, understand OSHA requirements Major changes in OSHA crane policy include: - answerground conditions, assembly/disassembly, rigger qualification, power lines, inspections, operational aids, operator certification, signal person qualification, training Ground conditions are: - answerThe ability of the ground to support the equipment Supporting materials are: - answerBlocking, mats, cribbing, or similar supporting materials Equipment must not be assembled or used unless ground conditions are: - answerFirm, drained, and graded to a sufficient extent so that, in conjunction with the use of supporting materials, the manufacturers specifications for adequate support and degree of level of the equipment are met The controlling entity must: - answerEnsure the ground preparations meet the requirements and inform the user of the location of hazards beneath the equipment set-up area If the a/d director or operator determines that the ground conditions do not meet the requirements they must: - answerMeet with the controlling entity regarding the ground preparations that are needed so requirements can be met New crane power lines standards: - answer20' up to 350KV, 50' over 350KV Assembly disassembly clearance from power lines: - answer20' Identify work zone by either: - answerDemarcating boundaries, defying as 360 degree radius to maximum radius