CSX Conductor FINAL REVIEW Quizzes And Answers Latest 2024

Who is Responsible for making Pay Claims? - Answer-Ranking Employee or Employee to be paid What is the Hand Signal for Reduce Speed? - Answer-Arm out horizontal over the track Which of the following are allowed by the Rulebook? - Answer-Always take the safe course What is the Hand Signal for Release Air Brakes? - Answer-Hand held overhead when Equipment is Standing Who authorizes a Utility Employee to join an Assigned Crew? - Answer-Ranking Employee What is the normal position for a switch or derail? - Answer-In the "on" or derailing position Before lining a switch or derail, an employee must? - Answer-1) Ensure that any preceeding movement has passed clearance points. 2) Ensure that the device is not locked, spiked, or tagged "out of service" If a lock is found to be defective or missing on a main line switch or derail an employee must? - Answer- 1) Report device to Trainmaster/Dispatcher. 2) Be governed by the instructions of said Dispatcher/Trainmaster When an Employee determines that a switch or derail is defective, the employee must? - Answer-1) Not operate the device. 2) Report device to Proper Authority You are standing in a yard using multiple switches on long shoves. After lining each switch an employee should check what? - Answer-That all switch points are flush and aligned properly. When using a portable radio in a shove move, Employee instructions must specify what? - Answer-1) Employee is clear of all tracks. 2) Switches and Derails are all properly aligned for the moveWhat is a System of Tracks, other than main tracks and sidings, used for making up trains for storing cars and other purposes? - Answer-Yard By Definition, what is the location in a turnout where it is unsafe to pass on an adjacent track? - AnswerClearance Point What is a track connection between two adjacent tracks, not necessarily parallel, consisting of two switches whose primary purpose is to allow crossing from one track to another? - Answer-Crossover What is a device of "Necessary Track" used to change from one track to another? - Answer-Switch What is the the minimum distance you must stand from a switch or derail involved in the route of a passing train? - Answer-30' When crossing tracks with standing equipment, what safety precautions must be taken? - Answer-1) Stop and check both directions. 2) Do not cross within 25' of standing equipment. In addition to facing the equipment and maintaining 3 points of contact, what other steps must be taken when disembarking moving equipment? - Answer-1) Avoid getting off equipment in an unsafe area. 2)Stop at the bottom rung and observe where you will be placing your foot. When crossing standing equipment you must find sufficient handholds and avoid? - Answer-putting feet on coupler, air hose, anglecocks etc. when riding a car, maintain 3 points of contact, be prepared for unexpected movement, slack actions and? - Answer-Face direction of movement Do not ride on a car with a grab bar that is less than ___________ above the ground - Answer-12"