Tooling-U The Basic Additive Manufacturing Process 131 Final Exam Questions & Answers 100% Correct.

What computer programs generate the build file for an additive manufacturing operation? - ANSWER-Slicing program What is the last step for a basic additive manufacturing operation? - ANSWER-Performing post-processing. What are the two materials most commonly used to create AM parts? - ANSWER-Polymer and metal Which of the following statements best describes the effect an AM part's use has upon its design? AM parts designed for use in: - ANSWER-ANSWER IS NOT: Visual aid applications must meet precise specifications and dimensions. / Secondary process applications can have lower resolutions than other parts. In which of the following scenarios would an engineer select an inexpensive plastic as build material? An engineer would choose an inexpensive plastic to: - ANSWER-Create a conceptual model of a part. Which AM method would be best suited for quickly creating metal AM prototypes? - ANSWER-Binder jetting What manufacturing process involves successively layering material to build a part? - ANSWER-Additive manufacturing What post-processing procedure can reduce the visibility of an AM part's layer lines? - ANSWER-Abrasive finishing What procedure must a build plate undergo before it can be reused during an AM metal process? - ANSWER-Resurfacing Which of the following will operators commonly perform while setting up an AM machine? During setup, operators will level the build platform and: - ANSWER-Load build materials. What is one action operators may need to perform while running an AM machine? Although AM processes are mostly self-sufficient, operators may need to: - ANSWER-Load additional build material. Which AM method involves dispensing an adhesive material onto layers of granulated build material? - ANSWER-Binder jetting Which AM process involves layering heated build material as it is forced through a nozzle onto a build platform? - ANSWER-Material extrusion What step does an operator perform after shutting the safeguards of a direct metal laser sintering (DMLS) machine and before starting the build process? - ANSWER-Filling the build chamber with an inert gas. Wha