MA 2A Hoisting Exam Questions and Answers Graded A+

MA 2A Hoisting Exam Questions and Answers Graded A+ What is the purpose of the 520:C.M.R.6:00 To establish rules and regulations for safety of the public What regulatory authority governs hoisting machinery 520-C.M.R. 6:00 MGL chapter 146 section 53-54A What type of system is used when working on de-energized circuit Lock out tag out In event of death, department of public safety must how soon Within 1 hour of incident When are reports of injury that required hospitalization or medical treatment sent to the engineering section of department of public safety Immediately After the person has been treated All welding and cutting on hoisting equipment must be done in accordance with requirements of what American society of mechanical engineering (ASME) What items should be checked on daily inspection Wire ropes, bearings, gears, friction clutches, brakes, chain drives and anything subject to wear What type of protection should be given to the operator of material handling and moving equipment Protection from weather, heat in winter, safety glasses, hard hat, roll over protective system What equipment requires hoisting license Height of lift exceed 10' or weight of load exceed 500 lbs or the capacity of the bucket is more than 1/4 cubic yard What is the minimum absolute limit of approach of power lines when operating equipment 125,000 volts = 10' 250,000 volts = 15' 250,000 volts or more = 25' How do you test the load brakes Pick test, lift load about 1', hold it for one minute How should you approach and load any vehicle Approach any vehicle to the side slow and square How should you carry a load Carry and load 12-18" off the ground How close to a marked utility can you dig Hand dig within 18" of marked utility When driving a wheel loader down hill, what should you not do Raise the bucket and put transmission in neutral When filling a trench, is it advisable to use the backhoe bucket in a sweeping motion Don't use side of bucket. Either scoop or push in with front bucket What are dip stick extensions used for They are extensions attached to the dipper stick to give backhoe additional digging depth When towing a backhoe or loader what speed should you not exceed 5 mph What does articulate mean on a wheel loader