Pesticide Applicators (questions and answer) 2024

Pesticide Applicators (questions and answer) 2024 Nozzle flow rate, ground speed and spray width per nozzle affect calibration - CORRECT ANSWER-True Spray droplet size is affected by the pressure or flow rate, the size of outlet orifice and viscosity and physical characteristics of the spray mixture - CORRECT ANSWER-True Which nozzle material is most resistant to abrasion and corrosion - CORRECT ANSWER-Stainless steel Calibration is - CORRECT ANSWER-Adjusting application equipment to provide the desired pesticide rate Which of the following will cause least drift - CORRECT ANSWER-Large orifice, low pressure To double flow rate, you must increase the pressure - CORRECT ANSWER-4 times To make a major change in the rate of application, gallons per acre, of a sprayer - CORRECT ANSWER-Change nozzles One way to reduce the drift of herbicide is too - CORRECT ANSWER-Increase droplet size The rinse solution from a pesticide container should be - CORRECT ANSWER-Poured into the sprayer tank containing the mixed pesticide To dispose of empty paper bags that were used to contain pesticides - CORRECT ANSWER-Cut all side of bag, flatten and dispose in an approved sanitary landfill The liquid which results from rinsing a pesticide container, pesticide equipment or other pesticide - containing materials - CORRECT ANSWER-Rinsate The hazard associated with a pesticide product depends entirely on the toxicity of the active ingredient - CORRECT ANSWER-False The period of time between a pesticide application and when workers can safely go back into area with protective gear - CORRECT ANSWER-Re-entry period The most dangerous procedure in handling pesticides is - CORRECT ANSWER-Mixing and loading pesticide When handling pesticides, which of following should you not do - CORRECT ANSWERWear leather or paper gloves What type of gloves should be worn when handling highly toxic pesticides other than fumigants - CORRECT ANSWER-Unlined neoprene gl