STS-C Exam Questions With 100% Correct Answers 2024

STS-C Exam Questions With 100% Correct Answers 2024 AIHA - answerAmerican Industrial Hygiene Association ASSE - answerAmerican Society of Safety Engineers NFPA - answerNational Fire Protection Association IIE - answerInstitute of Industrial Engineers NSC - answerNational Safety Council SFPE - answerSociety of Fire Protection Engineers SSS - answerSystem Safety Society Career Paths in Safety - answerEducation Experience Certification STS - Safety Trained Supervisor STS C - answerSafety certification for new safety professionals Four years experience in industry, if not a supervisor Or two years experience, one as a supervisor 30 hours of safety related training Two hour, 100 item examination Quality & Recognition, National Commission for Certifying Agencies (NCCA) - answer- Accrediting body of the National Organization for Competency Assurance (NOCA) - NCCA accredits certification programs/organizations that assess professional competency What is Certification? - answerThird-Party Validation of: Education and Training, Experience, and Demonstrated competence with a body of knowledge by examination VALUE of Certification - answer- Identifies individual as a source of expertise by lengthy examination. - Associates organization name with globally recognized certification. - Enhances reputation of organization by having certified individuals in safety, health, and environmental positions. - Improves relations of organization within safety, health, and environmental community. - The mark of a PROFESSIONAL. VALUE of Certification - answer- Exemplifies enhanced professional credibility because of standards of practice required to obtain and maintain certification. - Demonstrates that certificate holders have been reviewed and tested by an impartial commission and deemed to have met nationally accepted criteria. - Provides an examination basis to assess employee competency. - Recognizes the highest level of professionalism in certified safety, health, and environmental executives. What is STS? - answer- Certification process - Not safety practitioners - Safety responsibility - Establishes minimum general safety competency - Process for a culture change STS Targeted Toward: Supervisors - answerCrew Chiefs Foremen Future Supervisory Candidates STS Targeted Toward: Group Leaders - answerSafety Committee Members Departmental Safety Liaisons/Champions STS Targeted Toward: Leaders - answerSenior Executives Managers at all levels within the organization STS Qualifications - answer- Education: 30 hours of safety-related training - Experience: Two years industry experience plus one year as supervisor OR Four years industry experience if not a supervisor - Competence: Demonstrated through examination Program/Certification Benefit: Improves - answerSafety Culture Productivity/Profits Work Quality Accountability Program/Certification Benefit: Reduces - answerInjury Frequency and Severity Insurance Premiums Regulatory (OSHA) Liabilities STS: Observed Benefits - URS - answer85% reduction in recordable injuries & illnesses 85% reduction in worker's compensation costs Increased competence in supervisory safety decisions Improved quality of safety inspections & audits Demonstrated commitment to employee professional development Enhanced technical confidence level Improved productivity and profitability on projects Continued professional development Demonstrated commitment to Zero Injuries vision What best describes the job safety analysis (JSA)? - answerA JSA is a method where employees participate in the identification of hazards and unsafe work practices and implement measures to reduce the associated risk. A masonry crew uses a mortar mixer that is powered by a gasoline engine. A V-belt drive runs between the motor sheaves attached to the gear mechanism for the drum. What hazard requiring guarding does the belt drive exhibit? - answerPinch point or nip point Once a supervisor reads the operating manuals for new equipment, what should the supervisor do with them? - answerReview the manual withy the employees who will be using the new equipment When one or more employees enter a permit-required confined space, what must be shown on the permit? - answerThe measured level of oxygen and airborne flammable and toxic materials present in the confined space What is the primary reason for conducting a safety inspection? - answerTo identify unsafe conditions and practices A work environment where safe work practices and habits are part of the culture starts with a commitment by the organization's: - answerTop management In general, fall protection required - answer6' or more A change in elevation 19" or more requires a - answerladder or stairs, for access Fall anchorages must support - answer5000 lbs. per person Guardrail system: The top rail on a system must support - answer200 lbs. and be 42" + or - 3" high Guardrail system: The midrail must support - answer150 lbs. and be installed midway between top rail & working surface Guardrail system: The toe board must support - answer50lbs. and be at least 3 1/ 2" (nominal) in height Wood guardrails require an upright support no more than - answer8' apart Wire rope guardrails must be flagged not more than every - answer6' Top edge of guardrails must not deflect to a height less than - answer39" Stairs with 4 or more risers must have at least ___________ ________________________at each unprotected edge - answerone handrail and stair rail system at Place warning lines for roofing controlled access zones not less than - answer6' back from edge A double cleated or 2 ladders needed when only means of access for - answer25 or more employees to an elevated area ladder rungs to be spaced not less than - answer10" or more than 14" apart When portable ladders are used for access to an upper landing, the side rail's must extend at least - answer36" above the landing or grabrail provided Extension or job ladders must be used at an angle equal to - answer1/4 the working length of the ladder