AMMO 49VERIFIED SOLUTIONS 100%

AMMO 49VERIFIED SOLUTIONS 100% How is inerted ammunition that lept its original markings and paint identified as inert? - ANSWER It is kept in an ESO-controlled display cabinet Which example of an accident, incident, or mishap do you report? - ANSWER All accidents, incidents, and mishaps shall be reported. An example of an explosive safety officer (ESO) duty for program 1: Explosives and safety management is - ANSWER Managing the station's Explosives safety program What type of documentation is NOT required for explosive safety site approval request (ESAR)? - ANSWER DD Form 626 Qualification determines if an individual meets the requirements to do what three actions? - ANSWER -Perform a work task -Handle Specific Equipment -Handle Specific A&E What two actions are required to support qual/cert training? - ANSWER -Establish A Training Plan (TP) -Training all A&E personnel What is an example of a QUAL/CERT work task code (WTC) - ANSWER Handling A&E When shall a new Standard Operating procedure (SOP) be developed? - ANSWER Before Starting A&E operations When does an SOP expire? - ANSWER Four years from the date of approval Which one of the following activities requires a SOP? - ANSWER Missile Build-up procedures What is the maximum allowable height for vegetation surrounding a magazine? - ANSWER 18 inches What is a pier/wharf safety observer? - ANSWER Qual/certified personnel responsible for observing hazardous material handling to prevent rough or unsafe handling Who or what is authorized to declare unused military munitions as waste? - ANSWER Explosive Safety Office (ESO) How many down conductors are required on a lightning protection system (LPS) to ensure a dependable, low- resistance path to ground? - ANSWER Two Grounded metal objects (eg ac units, pipes, sprinklers, etc.) within__________ feet of LPS conductor are often bonded to is - ANSWER Six What type of deviation is an exemption? - ANSWER A long-term deviation for operations that cannot meet criteria at existing facilties What is the maximum amount of time permitted for an exemption to be in effect? - ANSWER 5 years Which A&E personnel must be qualified/certified before handling A&E? - ANSWER All individuals (civilian & Navy) who handle A&E Where are standard operating procedures (SOPs) required to be located? - ANSWER Areas where processing is performed Some examples of required SOP content includes a titles page, references, step-bystep procedures, and - ANSWER A workers statement indicating the worker clearly understands his or hers duties Which condition code (CC) identifies A&E materials as waste? - ANSWER V How many exits are required for each operating room containing explosives? - ANSWER Two lightning protection system (LPS) inspections are guided by - ANSWER What are two examples of information covered by a range emergency action plan? - ANSWER Location of emergency devices (e.g. first aid kit Emergency service entry routes What is the correct action to take if the chain of custody is compromised for material documented as safe (MDAS) - ANSWER ORC records track what two items? - ANSWER Areas known or suspected of containing UXO All military munitions (including duds) expended by date, type, quantity, and location This sign warns you that - ANSWER Electromagnetic radiation (EMR) sources might affect ordnance How are personnel notified of active active range operations? - ANSWER Red flags What is a fire bill? - ANSWER A